2017 Tundra CM Door Power Windows Inoperative

Windows worked fine. Pulled a trailer camper (rental, 2022 model) a couple hundred miles and at destination the power windows in all doors were inoperative. Door windows don't function from any of the switches. Have tried with lockout button in both positions. Cab rear power window does function.

Have checked both fuses under the dash (20 A - "POWER No. 3" and 30 A - "POWER No. 1") along with all fuses under the hood (particularly 30 A - "POWER NO. 2" and 25 A "POWER NO. 4").

Not sure if door power windows failure and pulling the trailer is a coincidence, or part of root cause. Looking for advice for other components (relays?) to check.

 

Look up the Master Window switch TSB. See if your truck falls under it, print it out and contact your local dealer if you fall under the TSB. If you don't upgrade to all auto switch master???

 

This one?

https://www.tsbsearch.com/Toyota/C0M

Appears to apply to 2007-2011 Tundra, so a bit earlier than my 2017. Unless there is a similar TSB for the '17?

 

Look up your vin on the NHTSA site

 

"0 Unrepaired Recalls"