What have you done to your 2.5 gen Tundra today?

S23 and I've gotta Rhinoshield which is super low profile and way easier to handle

 

No issues at all. It’s about the same thickness at the rear rough country bumper I have…it’s just a modular design rather than one solid piece. I like it so much better than the factory chrome I had.

 

I have the S21 in the Otterbox Commuter case and the OffRoam holds it nice and tight with no problem at all, still has room to go wider also, so the defender would be no issue at all, in the picture i have my phone in and that's pulled all the way open... not sure how wide the tackform goes

 

I really feel for you people in Texas. Hot normally, but I see in the news it's brutal this year!.I'm so happy to live in the temperate Pacific North west.

 

I installed the BlackVue

BlackVue DR900X-2CH IR with 256GB microSD Card | 4K UHD IR Infrared Interior Cloud Dashcam | Cloud Connectivity | Optional LTE Module

DR900X-2CH dashcam, with this Stem Mount and 1" Custom Folded Bracket for the rear camera, and used these

$10 Nilight - 50040R 12V Car Add-a-Circuit Fuse Adapter with Standard and Mini TAP Profile TAP Blade Fuse for Cars Trucks Boats, 10 Pack Fuse Holder-3 types, 2 Years Warranty,Blue, Red, Black

Fuse Adapters to tie into kick panel fuse box.
Also, followed this install video for general guidance (especially around what specific fuses to tie into). Took about 3hrs in total for first timer. I'm happy. Looks factory.

 

With the larger 9 + inch head units, does using that vent present any issues?

 

The Tackform is 3.5 inches.

https://www.tackform.com/collection...arger-16-22-toyota-tacoma-14-21-toyota-tundra

 

Picked it up from the alignment shop today, I was only 1.5 degrees out on the camber after setting the SPCs and lower cams by eye…. No laser needed lol. Snapped some pics of the new look in the fresh cut hay patch on the way home.




now to order flares and a rear bumper.

 

Negatory. My Pioneer is 10" and no problemo.

 

Ain't nuffin' for a good AC.

 

On the border of Idaho and Washington state and it's going to be 97 degrees on Sunday.

My 1794 came from Texas so it has heavy window tint and even the windshield is tinted. Will appreciate it more this weekend.

 

We'll get a winter from Hell to balance it all out...I love being cold!!

 

It’s not as bad as they make it out to be. It sucks, but it’s not out of the norm.

 

New shoes installed today…

 

What size on the WPs?

 

I wanted to go a little bigger but was just concerned about rub and didn’t want to mess with correcting that issue. I did a poll on FB of my choices and Falkens won out by a mile. I had intentions on getting the Toyos, the more research I did the ratings were pretty even with slight advantage to the Falkens. Then when I learned that the WP’s had a reinforced sidewall, it was really noticeable when I looked at both sets at discount tire before making my decision, the Toyo sidewall was really soft. The Falken’s also had a more aggressive looking tread which I preferred so I went with them.

 

275/60/20

 

I've got those in bronze. They rock.

 

yeah I like the Tech wheels. Exposed lugs, small center cap, and no beads or bolts in the lip.

 

I need one of these. My setup clips into the vents and the weight of the phone makes it twist out of place. Frustrating

 

I use this set up. Super strong and easy to install and still allows full function of the vent. Also allows for great flexibility of orientation including horizontally. Mounts with a very thin metal disk adhered to the back of the phone/case. Comes with two of these so I have one attached to a tablet and it holds that very well too. So no issue regarding phone/case size.

 

I have an Otterbox on my Note20 Ultra, and it can be a bear to try and one-handed text, but other than that it's not bad. I don't dork clip and rarely put it in my pocket. I hate stuff in pockets and avoid it as much as possible.

 

Ditto! I literally pull out everything in my back pockets and have to either hold all of it in my hands or put it on the table directly in front of me. So wallet & phone come out when I get in my truck or sit down anywhere.

 

I did the metal plate on the backside of the case thing for a while but it makes it hard to wirelessly charge. I had to put the plate on a corner of the case instead of square middle and it barely held on when attached to the old magnetic mount.

 

Tow Mirrors (Boost Auto). Make trailering recently very easy. Can't imagine going back to the stock mirrors. Easy to back in the driveway with accuracy.

 

Note 20 Ultra here too! I hate wireless charging, too slow. So I'm happily using a big Scoche magnetic mounting plate in my $10 Spigen case. Phone never falls or vibrates on my mount.

 

Added the center console AMPS panel from ICS with some cup holders from Amazon. Also added 2 max pod lights from VLEDS to light up the molle storage pouches below.

 

I thought it would be too but nope. I can charge my S23 in 1.5 hrs on its wireless charging station

 

Filled up my tank.

 

Less than $3 a gallon?!