Help w/ 6112’s

So , I’m about to put my 6112s and 5100s.
Now I’m debating what height I should use between 1.3 or 1.9 . I’m not a hardcore off-roader. Just back and forth to work and snow driving in the winter. I want that leveled look.

suggestions would be appreciated

TY!

 

Also my tire size wildpeak 275/70 18

 

Just put 6112's on my truck a couple of weeks ago. They are set at 1.3", front sits 0.5" lower than rear. Not level. If you want level, go with 1.9". Also, I have a 0.5" lean, driver side sits 0.5" lower than passenger site (both front and back). I did not consider shims, but the for the price, I wish I had. Looks like I will be back in the shop and getting another alignment!

 

Thanks sleeper! Yeah, I just dropped my truck off at the mechanics for them to work on it 2mrw. My shocks are pre-setted at 1.3 , but told the mechanic if he can adjust them to 1.9 not thinking about shims.. SMH!
Should I leave at 1.3 or 1.9?

 

Only you can answer that. My preference is 1.9 so it is leveledl 1.3" is slightly raked, but not very noticeable unless you are up close with a tape measure. If the mechanic will reset the shocks to 1.9 at no cost, I don't think you will be dissapointed with the stance.

just my opinion. Have you read the 72 page thread about 6112 settings yet??

 

Thanks man! I’m going w/ 1.9 . After reading the 49 of 72 page thread I convinced myself that’s the way to go.

 

1.9 is level front to back.

 

1.9 drivers side and 1.3 passenger. It will sit level.

 

Check out my experience with the 6112's. Do it right the first time.
https://www.tundras.com/threads/6112-setting-and-tire-wheel-combo-thread.23699/page-71#post-3039635