Help identify a sensor

I have a 2023, tundra SR. I found a sensor on the passenger side, right in front of the air filter box. Having the basic model, I wonder if this is a plug for active shutters/fog, lights, or another ambient temperature sensor. Seems to have too many wires running to it to be just an ambient sensor. If anyone with higher trim models, can check to see if they have one or if it’s connected to something. I would greatly appreciate it.

 

I'm pretty sure that's a ground point. Connector is all the grounds for different systems.

EDIT: found diagram.

 

Oh ok. Makes sense why so many wires going to a dead end plug. We’ll I guess no fog lights install here then. Thank you for looking that up for me. Appreciate it

 

Toyota ground wires are normally white with a black stripe and all these wire landed are that color.

 

I also have an SR and am planning on tapping a fuse in the drivers side box. Refer to these threads for more info.

https://www.tundras.com/threads/cali-raised-led-oem-square-switch.124342/
https://www.tundras.com/threads/plug-and-play-oem-switch.124314/#post-3183426

https://www.tundras.com/threads/off...arker-light-thread.112137/page-5#post-3155227

And I believe eddiefromcali posted the below tap in the drivers side box for fog lamps.

 

Are you installing after market or OEM fogs?

 

Oem and used this harness which plugs into them directly. I ran the harness today and it works fine.


https://www.ebay.com/itm/2558800642...wp9f6JvQMa&var=&widget_ver=artemis&media=COPY

 

Sweet! Thanks I bought that harness too. Do you mind taking some pics when you have a min to show how you ran the wires, and installed lights. Did you have to buy a separate plastic trim piece from a higher trim model that has the punch outs for the fogs?