FN Wheels BFD (updated design) - 18x9 (PNW) *SOLD*

Great wheels - designed by FN and manufactured using Konig's flow form process for reduced weight and greater strength.

$900 local pickup (Seattle area/PNW); shipping at buyers expense

Diameter: 18"
Width: 9"
Bolt pattern (PCD): 5x150mm
Offset: +18mm
Backspacing: 5.71"
Centerbore: 110mm hub centric for Toyota applications
Matte Bronze

~10k miles; includes TPMS valves and black M14x1.5 lug nuts.

Some additional notes from FN as these are the updated BFDs:

Key details and specs for the new flow formed FN Wheels BFD wheels:​

• • Flow formed construction method / manufacturing technique.
    • The flow form manufacturing technique has allowed us to keep to make the new BFDs very light weight (23.5lbs per wheel approximately) while simultaneously increasing the load rating to 2,500lbs per wheel with up to a 35" diameter tire as tested to DOT and JWL-T / VIA (Japanese) standards.
  • Additionally, strength and rigidity were increased significantly across other portions of the wheel (compared to the original BFD) as a result of updated research, development, analysis, and state of the art manufacturing methods.
  • Hub centric design without the need to install special caps or rings.
  • Offset increased +6mm for better wheel well clearance with larger diameter tires (5x150 version).
    • Specs are : 18x9" | +18mm offset (5.71" backspacing) | 5x150 bolt pattern |110mm center bore.
  • Improved center cap design with the ability to attach the included FNW emblem or leave the emblem off altogether.
  • Lug / stud openings machined to accept extended thread (ET) conical seat lug nuts for maximum stud engagement and torque retention when installed on the short OEM wheel studs on the front hubs of 4WD Toyotas.

No heavy OR miles - a couple fire road

 

PM’d

 

Sold