Another prepurchase "will it fit" thread

Yes I'm sure this is asked frequently, but just wanted a final sanity check before ordering. I've read through much of the stickys above, played with the visualization calculators, and think it will be fine, but just want opinions from folks with actual experience. Current setup that was on the truck when I bought it:

275/65/R18 Geolander ATs (worn down now) on stock 18" wheels; I believe 8" wide/+60 offset according to the stickies above.
Stock suspension to the best of my knowledge.

I put on a Resz high clearance front bumper shortly after I got the truck.

I'm getting Falcon shocks installed later this month and currently planning to level the front with no other suspension mods.

Proposed setup:

295/70/R18 with aftermarket wheels, I'm currently looking at 18x9" with somewhere around +25 offset.

The perennial question... "will this fit"?

Just want to be sure or look at last minute other considerations before I pull the trigger on a ~2500$ wheel/tire order.
Thanks for any input.

 

One thing I don't get in the stickies: it seems a constant concern is UCA clearance, yet the calculator/visualizer says the inside wall of the tire will be an inch further away from the suspension... so how is this a concern?

I also want to have suspension travel available without hitting stuff, not just on flat ground while turning.

 

Decided to send it.
Clearance to the UCAs looks the same as it did before, which is what the calculators were indicating.
Just one quick spin so far, but no issues turning almost to full lock.

 

Very nice!