1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Differential kind of question Gear Oil 75W 90 or 75W 140 Gen 1 TRD/Sport/SR5 Shock/Strut replacement Which mats? Lighting Question Normal brakes are possible!

oops

Discussion in '1st Gen Tundras (2000-2006)' started by wiggilez, May 14, 2023.

  1. May 14, 2023 at 1:49 PM
    #1
    wiggilez

    #1
    wiggilez [OP] New Member

    Joined:
    Apr 7, 2020
    Member:
    #44765
    Messages:
    65
    Gender:
    Male
    Vehicle:
    2004 access cab 4x4 tundra
    Topper, 1.2-2" lift, older motorola radio
    upload_2023-5-14_16-46-20.jpg

    I was rebuilding a caliper cause the pistons were seized on one side, but then I accidentally broke the bleed valve off when I got it all back together.

    those with a keen eye might also notice that my tap isn't straight, and that would be because i drill my hole at an angle :/
     
    wiggilez, May 14, 2023
    #1
  2. May 14, 2023 at 1:51 PM
    #2
    Windsor

    #2
    Windsor Why do I do this to myself?

    Joined:
    Jul 8, 2018
    Member:
    #16847
    Messages:
    908
    Gender:
    Male
    First Name:
    Chris
    Homeless in Oregon
    Vehicle:
    2008 Tundra Crewmax 5.7L
    Some.
    My first thought when I saw the picture was that you were going to say you broke the tap off.....
     
    Windsor, May 14, 2023
    #2
    BravoDeltaRomeo likes this.
  3. May 14, 2023 at 1:58 PM
    #3
    JasonC.

    #3
    JasonC. ¯\_(ツ)_/¯

    Joined:
    Jan 23, 2023
    Member:
    #90779
    Messages:
    1,187
    TX
    Vehicle:
    2001 4x4 4.7L AC Limited 55k mi
    Hey the good news is now you get to do the 13WL upgrade
     
    JasonC., May 14, 2023
    #3
    bmf4069, N84434 and Sunnier like this.
  4. May 14, 2023 at 2:04 PM
    #4
    Sunnier

    #4
    Sunnier Pity the warrior that slays all his foes

    Joined:
    Aug 21, 2017
    Member:
    #9171
    Messages:
    12,311
    First Name:
    Sunny
    San Diego, CA
    Vehicle:
    2017 Inferno Tundra DC TRD & Longtravel 1st Gen, Banner/ HulkSmash build
    And now you can justify buying a home drill press.

    a lotta silver lining here, Buddy! :)
     
    Sunnier, May 14, 2023
    #4
    bmf4069, landphil, N84434 and 3 others like this.
  5. May 14, 2023 at 2:13 PM
    #5
    Randy Morton

    #5
    Randy Morton Life takes its toll, please have exact change.

    Joined:
    May 15, 2016
    Member:
    #3378
    Messages:
    1,710
    Gender:
    Male
    First Name:
    Randy
    Deepinahearta, Texas
    Vehicle:
    2012 Tundra Double Cab (I call it my Land Yacht)
    Randy Morton, May 14, 2023
    #5
    Sunnier[QUOTED] likes this.
  6. May 14, 2023 at 2:26 PM
    #6
    Aerindel

    #6
    Aerindel New Member

    Joined:
    Jan 31, 2019
    Member:
    #25399
    Messages:
    1,726
    Gender:
    Male
    Montana
    Vehicle:
    2000 Tundra AC, SR5, 4.7 V8 4WD, 325,00ish miles.
    I had a tire chain break about a week after buying my tundra, which then wrapped around the axle, and tore the break line off with the fitting, and I ended up having to do this same repair to get that fitting out.
     
    Aerindel, May 14, 2023
    #6
  7. May 14, 2023 at 8:15 PM
    #7
    wiggilez

    #7
    wiggilez [OP] New Member

    Joined:
    Apr 7, 2020
    Member:
    #44765
    Messages:
    65
    Gender:
    Male
    Vehicle:
    2004 access cab 4x4 tundra
    Topper, 1.2-2" lift, older motorola radio
    that tap not braking is about the only thing that went right this weekend.

    I've actually been looking at those little work bench mountable units as I don't really have enough space to justify a full size one.
     
    wiggilez, May 14, 2023
    #7
    bmf4069, tvpierce, Windsor[QUOTED] and 1 other person like this.
Register FREE to Reply!

Products Discussed in

ASSORTS New Pilot Tap Wrench Spindle -Tap,Thread, Drill Press, Lathe (1/4" to 1/2" 1/4 "to 1/2" (6 to 12 mm))
$19.98
To Top