What have you done to your 2.5 gen Tundra today?

Looks great ! My alumunum hitch is holding up well. Bought it on Amazon in 2019, seem hard to find so it's good to have your skills.

 

I’m on my 4th set of Yokohama G003s and that should say enough. Tires are solid.

 

Got a wash!

 

Really like the TRD emblem on those! Are those the GoRhino D6 Sliders? Look a lot like mine and when I purchased them, I had anticipated them sitting closer to the frame. I was a little disappointed as I thought the pinch weld was going to be more covered.

 

Nice! (assuming we're talking home gym equipment)

Getting set up in 1/3 of my garage has been a great change. Workouts are more consistent, but it is another potential money pit if I'm not careful

GHDs are one of those items I've often debated but never wanted to sacrifice the real estate and $ for yet I don't even think twice about their value being completely worth it.

 

Picked up a set of Rock Warrior wheels. Time to get them all taken apart and refinished.

 

Either way you have to develop the new habit. I started closing it by the handle when I got my Tundra and I now know where it is without stepping around the door. Not saying one way is better than the other, just my .02.

 

Looks good. I say mount it how it works best for you. If that works for you, then it's good.

 

Switched my Prospeed catch can to a radium. Also sold the maggy blower so time to order the whipple.

 

Get those wire cutters off the gold!!!

 

I don't know what any of those words mean, but it looks awesome.

 

Catch can - An oil catch can is used to filter and catch the excess oil before recirculation. Its other goal is to prevent oil mist or vapour from reaching the crankcase, which is known as blow-by. Blow-by is defined as the loss of compression as it leaks past the piston rings into the crankcase.

Maggy blower = Magnuson Supercharger
Whipple = Whipple supercharger

 

Spot on!

 

Yes
Home gym
It’s half the garage now, likely to be 2/3 of it soon.

 

Yes. They are the Go Rhino D6 steps. There were some defects on the steps, powder coat was peeling at the end, but I already had plans to Line-X them. This is much more easier for my kids to get in and out of the truck, and ease to step on when cleaning the truck. Yes, I was disappointed they don’t sit closer to the frame, but will have to get use to it.

 

I didnt wanna post a half truth so... Google FTW

 

Putting a lot of thought into selling her. Is there a thread on here to gauge your truck's value? I can get the KBB value for the stock version, but I don't really know how much mods should affect asking price. All my mods are listed in my sig for anyone who wants to take a stab at it in here.

 

A lot will depend on paint condition and mileage.

Mods won't return much, and might even hurt value (bumper setup)

 

Well no pics. Just finally got rid of the creaking noise with the Pro skid plate. Removed the 2 bolts at the cross member what a pain in the ass. Took some rubber to put between the skid plate and the Valhalla plate. Noise completely gone. Just waiting now for talon to sell them new bolts to go into the skid plate to make it easier to tighten.

 

I need to do this. Mine creaks and pops so badly with my Talon plates.

 

Added foam tape to seal the tonneau cover to the tailgate

 

Every thing I searched seems every one’s noise is at the cross member where the two bolts are. Mine have been making noise for quite some time.

 

Yep, same here. I’ve gotten used to them and they do work quite nice for the kiddos to get in and out of.

 

I have a PRO skid on mine and loosened the back 2 bolts a put a nylon shim between the crossmember and the skid plate and the noise went away. I have Talons Plates sitting in the garage and hoping to get them installed in the near future. Do you think I need to put something between the Talon Plate and the Pro plate to avoid any noise?

 

I would Bergy24, I did and my noise went away.

 

Added fog lights this morning. Now I'm just waiting for Amazon to deliver the relay and new lever for the steering wheel column.

 

Nice tent! Thule $$$?

 

Looks great. Stock suspension or lift/level?

 

Dongar adapter arrived so I completed the install of my Garmin Mini 2 dash cam. Working great so far.