Bypass Kit

I'm trying to figure out how to get in touch with someone about a Gen 1 or 2 SAIS Bypass kit. I have no idea which one I need. OBD2 Codes are P0419, C1201, P2433. I was told by a Rutech Representative Via email that a bypass kit would not help. Anyone with any ideas.

 

If air induction pump does your truck go in limp mode? Search dreaded aip failure Tundratalk in google and you’ll see a bunch of threads on bypass. I have heard of guys being able to take both positive negative cables off battery for 10 min and plug back together to temporary bypass

 

https://hewitt-tech.com/

Edit: Changed link to home page.

 

Truck is already in limp mode. When I bought the truck it ran fine for a few days and then after I changed the battery out for a new one. The VSC, Trac Control and check engine light came on and I stopped at Autozone and had OBD test and I was gave a print out of the codes. But once I got home and done some research on SAIS I went out and looked under passenger front wheel well and I only have 1 Pump mounted there. Shouldn't there be 2?

 

All the codes you listed are listed here:
https://hewitt-tech.com/codes/

 

Pretty sure there is only one AIP pump on the passenger side wheel well. I remember this cause people had mentioned avoiding passenger side with huge puddles