WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Added to my diamondback. I cannot speak fondly enough on how much I love this setup.

 

What bolt is this? What kinda bit key do i need to loosen it if needed?
installed with CAT shield.

 

Black AFE tow hooks. Got my baja designs behind the bumper light bar but waiting on the pro light bar replacement to rip off the front end. Not wanting to do it twice.

 

It’s a security torx bit you’ll need to remove that bolt.

 

Mine does the same thing. I noticed it yesterday morning, almost fluctuated up and down with the RPMs until the truck warmed up. Super weird, not sure if that is normal but I can't say I have ever seen any other vehicle do that before.

 

How you wired the light bar (3 - white, blue, & black wires) to CR switch(5 - yellow, red, white, green, & back wires)? any diagram? Thanks

 

I have an 05 Sequoia that has the same fluctuation in oil pressure for 278,000 miles. I think it is just how Toyota designs it.

 

i hope that afe tow point has more than 1 mounting screw holding it in place[\s]

never mind i went to the afe website and looked at the design.

edit : too bad the video they used shows an aftermarket bumper. probably didnt want to show how its touchy with the oem bumper.

 

Yeah and what's up with the ammeter that goes up to 19v lol

 

did you get those trim pieces wrapped?

 

i am guessing so the needle sits in the middle when at normal charge and doesnt fluctuate as much with a broader range from low to high.

personally i would prefer a digital readout instead of a needle.

 

Thank you. Turned out to be a T40 security Torx and thankfully a set I have in the garage had this...Finally paid off buying a damn set several years ago to use one or two bit.

 

Installed Talons Garage cat shield!



running boards/sliders will be next, followed by Marathon seat covers.

 

Not used go seeing a 12v system have a 19v max on the gauge

 

true but if you check a 12v battery its usually sitting above 12v on the charge. when i had the drone mobile on the 2018 tundra, it would show the charge on the battery in the 13.3-13.5 range while running and down to 11.7 sitting outside at times.

 

Yep I am aware. My 2016 does that. It does not have a 19v ammeter though

 

Adventure ready!! I’m really digging the clean look of the sliders.

 

my 2018 platinum did

 

Interesting.

 

even the lower trims on 18+ had the 9-19v gauge. i think they change the dash on 18 and up to show the gauge.

google 18+ tundra dash images and compare to the previous years. the gauge was just above the fuel gauge.

 

2017 was the last year they didnt have the gauge. 2018 and on they added it.

1st pic is a 2017
2nd pic is a lower trim 2018
3rd pic is a higher trim 2018

 

Just put deposit on my 2023 Plat! You have a link for the chrome badge delete? Want this for when I pick up mine!

 

Thank you! And so begins my purchases....

 

Just added the cbi full skid plate and heritage grill to my tundra. Next will be lights in the grille and bumper.

 

Picked up some TRD Pro wheels n tires. I'm gonna need a custom plate soon. WANBPRO, FAUXPRO, NOTAPRO?

 

What is that on you hood? I know you don't have a hybrid...

 

Added some badges to the tailgate and put on the the Bak Revolver X4s. Both look great.

 

TRD OFF ROAD BADGE

 

Where did you find the badge? Link?