Clearance warning ecu

Ive searched to no avail tgerefore i has to ask.

Could anyone explain the function of the clearance warning ecu. I have a 2014 sequoia platinum with working bsm. Was looking to see if i had factory remote start module when i noticed some unplugged connectors. After looking through the manuals, its saying a clearance warning module is for 24 pin H43 harness. Apparently my vehicle doesnt have it.

 

I'm surprised you don't have this in your vehicle. But, I believe it's the parking assist sonar module;






the above pic is out of a 4-runner but the modules look similar....

This video is out of a 2014 Tundra, but it shows if you have Parking Assist Sonar it should be to the right of the steering column next to trac control and tow/haul... However, each trim/model may be different (especially if you are in Canada or another country)

https://youtu.be/720dHOiFSX0

It's possible you have it, and it's plugged in or controlled elsewhere (connected through a different harness) and for your trim that connection is not necessary...

 

Thanks for the follow up. Yeah its weird following the oem manual diagrams. Wondering where else would it be, its still too dam cold out so i am not in the mood to freeze my ass of to take off the panels again just to see what is indeed installed. Just weird thinking the oem wiring harness would have multiple connection locations i'll name the modules at a later date to give specific locations.

Originally i had suspicion that the oem remote starter module was removed because how does my luck 2 platinum.sequoias 08 & 14 and neither of them have this feature. So upon looking up all the un plugged harnesses i wanted to start identifying what appears to be missing.

 

Could this be for the specific park assist with the button? and not the radar sensors. If so then i do not have that option in my truck. Was that available for 2014?