1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need some help figuring this out

Discussion in '2nd Gen Tundras (2007-2013)' started by Markspap, Feb 17, 2023.

  1. Feb 17, 2023 at 8:52 PM
    #1
    Markspap

    Markspap [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #92215
    Messages:
    4
    So I just bought a new to me 2013 Tundra. I am doing all the fluids and filters this weekend along with spark plugs. That’s where I need some help.
    When putting in the front two spark plugs on the passenger side I must have pushed too hard on that heavy gray wiring harness and I pulled the wires out of the exhaust camshaft sensor (the lower sensor beside the coil pack). I found out when I started the engine and got a P0393 code. I ordered a new pigtail and connector but I have no idea what order the three wires go when I splice it in. The wires are yellow, red and black. Any help would be greatly appreciated!
    Thanks!!
     

Products Discussed in

To Top