Help with seal and boot kit part numbers for 2006 Tundra DC SR5

I'm getting ready to replace the CV boots on my 06 Tundra DC 4X4. 77K miles but the boots are cracking near the clamps. I want to get them before they tear and make a mess.

Not lifted so I will probably just go with Toyota boot kit which I believe is 044380C020.
Please correct me if that's wrong.

I want to replace the seals as well. I'm having a hard time finding Toyota part numbers.
The drawing looks like it's the same on both sides but I've read differently.

Can someone help with the part numbers.

Thanks!

 

See #4

https://www.sparksparts.com/v-2006-...-gas/front-drive-axle--axle-shafts-and-joints

 

Thanks. Nice parts site.
I got the boot kit right.

If you look at the seals they are #9. There are two part numbers listed but don't state R or L. They both state R and L.

• Positions: Right, Left, Right Front, Left Front, Front Right Right, Front Right Front

 

Thought I'd update this in case someone finds it in the future.

Toyota 044380C020 boot kit. 1 kit per CV axle.
Toyota 90311-47027 differential seal for driver side.
Toyota 90311-47013 differential seal for passenger side.

I'm also doing the ECGS bushing.

 

You may want look at getting one of these cv clamp tools.
I did the cv boots on my daughter's GX470 and some of the clamps are extremely difficult to secure properly.
There is also a good video on the Car care nut's utube channel.

ZKTOOL CV Joint axle Boot Drive Shaft Clamping Tool for Toyota Lexus 09521-24010

https://www.youtube.com/watch?v=YH5Cf7uJV5Y

 

Beware this seal. Theres nothing that keeps it in any certain place, you have to measure and put it in the exact spot it should be in.