Has anyone tried eBay's longer wheel studs?

While searching for ET lug nuts and longer studs for my '23 Tundra, I cam across these studs, found on eBay:
https://www.ebay.com/itm/164876042315?m=

Has anyone tried them with success, they claim the following:

 

3rd gen uses 139.7mm studs (same as Tacoma) while 2nd gen are 150mm, so just be mindful of that. Description makes it sound like these fit both Tacoma and 2nd gen Tundra

 

Don't think we are talking the same thing here. You are talking bolt pattern which is 6x139.7 (2022+ Tundra's & Tacoma's) and 5x150 for Gen 2's.

Bolt pattern does not matter when it comes to studs, well in fact it does, as the Gen 2's uses 20 of them, where as Gen 3's will need 24 of them. Lastly, when looking at the Gen 2's and Gen 3's p/n for studs (Tundra that is), they both had the same part number from Toyota, so they both use the same studs. Tacoma on the other hand, have a small stud (M12x1.5) which is not the same as ours, not sure why the seller on eBay is advertising they also fit Tacoma's.

 

In hindsight, I think you're right. My bad

 

@Vizsla has them and has had no issues. I'll be adding them as well

 

Sorry forgot to send you the link.

Been running them almost a year. The manufacturer marking has a dash on it that worried me, but everything checked out fine. Nothing scientific, tried destroying them side by side with oem using a press, and big impact, no issues. The threads looked a little rough from shipping, so bought a die to clean them up before install but didn’t end up needing it.

 

All good brother you better sippin mai tai's and Ritas over there in Barbados

 

What do you mean by a "dash" on it? On the studs themselves?

Glad to know that you tried some destructive testing and nothing negative to say!