1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Passenger Seat Belt Jammed In Seat Belt Guide

Discussion in '2nd Gen Tundras (2007-2013)' started by kitjv, Dec 21, 2022.

  1. Dec 21, 2022 at 4:30 PM
    #1
    kitjv

    kitjv [OP] New Member

    Joined:
    Dec 21, 2022
    Member:
    #88955
    Messages:
    1
    Gender:
    Male
    The front passenger's seat belt on my daughter's 2008 Tundra (4-door) is jammed in the guide going to the retractor assembly. Apparently the belt became misaligned in the guide & became jammed where in enters the plastic door panel. All of my attempts to pull the belt back into the guide were unsuccessful. Unless I am missing something obvious, it appears that the plastic door pillar panels need to be removed in order realign the belt in the guide.

    Can someone please point me toward a detailed explanation on how to remove these panels. I suspect that the panels are held in place with plastic tabs. But I am reluctant to blindly start pulling on the panels unless I know where the tabs are located.

    Thank you so much!
     

Products Discussed in

To Top