2018 Limited - Broken Mirror Passenger

So I was backing out the driveway, bent the mirror assembly back, and the mirror popped out. and I cannot get mirror back on.

I cannot see anything that was snapped off. Can anyone tell this idiot, how to "pop" it back on do i need to purchase a whole new side mirror?

Any advise would be greatly appreciated. (this is for a 2018 Limited, passenger side.)

Thanks,
Ian

 

Just pop it back on...hard to tell from the photos if it's gonna hold or not...

 

Looks like 4 plastic teeth pieces snapped off from the motor, brother

 

I center it, and push firmly and it just does not hold in place. I was expecting to hear a click sound or something.

 

The teeth are still there, it just wont click back in place. is there some sort of trick. i have tried taking the round bracket of the mirror but that sucker will not budge.

 

Looks about the same as out Tahoe mirror. It takes some real pressure to snap it back in. Just make sure all the hooks are properly lined up.

 

Check this youtube video, it shows you how to remove that glass, and that the mount spot is right in the middle, not those 4 teeth . https://www.youtube.com/watch?v=_rp3_Sjpm7c

 

Thanks for the video, it shows how to remove it. That has already been done when i backed into a large bush.

From what I can tell. I need to remove the round assembly, by "twisting" the clips with the plus symbols. Anyone has any luck in removing one of these? This is the main thing i need to remove. as it will just click back on the to motor assembly piece and I can slide the mirror back on.

Sorry for all the questions, i am total noob. Any would appreciate any help.

 

I was able to fix the mirror. so the trick for me was to push up on the round mount ring, and slidea flat head screw driver under each tab and it popper right out. then i was able to take the mounting rings and reattach it to the motor assembly (2nd picture from first post). then just slide the mirror back in to the bracket, take a little wiggling. but got there in the end.

Thanks for everyone's responses