OEM Switches

I ordered the Boost auto tow mirrors and am getting things ready for the install. I do not like the switch that comes with it for the power fold option. Is there one made by Toyota? I looked on Sparks but did not come up with anything...do they make other OEM switches for other options like backup lights or lightbars? Thanks!

 

Seems to be a few options out there, what blank are you trying to fit?

 

I want the switches to fit into the blank ones I have currently...next to the tow/haul switch to the right of the steering wheel.

 

Go to this eBay seller, more toyota switches than you can shake a stick at!

https://www.ebay.com/str/707211

 

Thanks for the link...do you know if the ones he has sit flush with the dash like the tow haul switch?

 

I have a 2003, so I do not know. But the only diff I see is there are two different sizes. You need to measure your existing switch H x W and find one with that measurement. 2 & 2.5 gen are more rectangular than 3rd gen. I bought some to stick in my 1st gen, they are the ones for the second gen. I think you want the ones that are a little more square, check dimensions!

 

Look at Air on Board and CH 4x4 switches as well. You want the ones that say "Toyota Small".

 

PERFECT!!! Thanks so much!

 

I got this ones and installed them for the flood lights of the boost mirrors. Makes sure they are 0.89" wide, 1.3" tall, 2" deep

$9 XJMOTO LED Light Push Switch On/Off with Connector Wire Kit Blue Backlit Compatible with Toyota Tacoma Tundra 4Runner

ref=sr_1_11

 

https://www.ch4x4.com/ Is a really good site makes custom switches too

 

Ordered a couple from them yesterday...looking forward to getting them in so I can go forward with the install!

 

Hope it works out for you

 

Wouldn't this OEM one drop in the factory spot and control everything?



Car Rear View Folding Mirror Control Switch Power Mirror Switch for Toyota Lexus 84872-5204

$19 Folding Mirror Control Switch, OE Number 84872 52040, ABS Material, Compatible with 1.8L 1794CC l4 Gas DOHC Naturally Aspirated 2008

https://www.amazon.com/dp/B07MZQRLLD

 

I did end up getting one of these as well and am in the process of trying to hook it up...I have a blue and yellow wire that controls the folding mirrors that I am trying to find out what slot they need to go into the existing wiring harness that plugs into the switch...also not sure what type of hook up in need on end of the wire?

 

Does anyone know how to remove the stock switch square blanks to the left of the steering wheel on 22 tundra?

 

I'd assume is similar to our switches and pushes in from the back. Gain access to the back side and you should be able to get it to release. If you have a replacement switch already, look to see how it locks in place.