1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Elka 2.5 IFP, 0-2" alignment number suggestions

Discussion in 'Suspension' started by BCTRD, Sep 27, 2022.

  1. Sep 27, 2022 at 9:52 AM
    #1
    BCTRD

    BCTRD [OP] New Member

    Joined:
    Aug 1, 2021
    Member:
    #66220
    Messages:
    205
    Gender:
    Male
    B.C.
    Vehicle:
    2021 MGM Tundra TRD Sport
    18"BBS Forged wheels, factory running boards, VLED's, Rigid Pro Led mod (D2 SAE), diff breather mod, Husky mats, DIY Cquartz UK 3.0, Husky liners, OCD organizers,
    Just installed the 2.5 non resi Elka's front/rear last weekend set at approximately 1 3/4" in the front.
    Couple more days after work of fine tuning the lean out and I'll have the truck aligned.
    Running PRO Wheels and Toyo Open County AT3 LT 275/75 18 tires.
    Rear springs are stock with no modifications.

    Any suggestions on alignment numbers which would work best or just let them set it back to factory. Basically sitting the same a PRO model so being OCD about mods and probably overthinking the alignment part.

    This was posted on the forum in response to a similar question.
    4* left caster, 4.5* right caster, .07 toe ea. side, 0* camber. Toe shouldn't exceed .14/ and not exceed .28 total.
    Most important IMO, get as much caster as you can (w/o sacrificing camber) and have .5* more caster right side.

    Thanks for the feedback
     

Products Discussed in

To Top