Alignment Question for 22s

Can anyone who actually knows more than “Green Good, Red Bad” tell me how bad this alignment reading is?

Just picked up the truck from 4WP and forgot to check the dang paperwork before heading home…

 

Do you have a lift? That caster is really low. I believe factory spec is closer to 4.4 degree of caster. Camber and toe is pretty spot on to factory spec.

 

westcott 3/1 and 35s

 

Ahh. That explains the lower caster.
But I feel like you can get closer to 3 degrees of caster, factory is 4.4 degree with tolerance of +\- 0.75 degree. From what I’ve seen other people with Westcott 3/1 some are getting around 3 degrees.
https://www.tundras.com/threads/alignment-after-lifting.106529/#post-2742776

 

Think I found the issue… they used the specs for 20-21 model which I’m sure is different…

Caster is how centered the wheel is front to back within the wheel well, right? If so, that could be why I noticed I’m still rubbing on full lock when reversing?

 

thank you, I’m going to call them Monday and see if they will fix this…

 

Push the rear cam bolts on the lower control arm as far out as it’ll go to maximize caster then adjust the front cam bolts to bring camber into specs.