1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2008 HID conversion won’t fit factory harness

Discussion in 'Lighting' started by TundraTRD08, Jul 16, 2022.

  1. Jul 16, 2022 at 4:10 PM
    #1
    TundraTRD08

    TundraTRD08 [OP] Somehow I fit 37s on a level

    Joined:
    Feb 19, 2021
    Member:
    #59320
    Messages:
    195
    Gender:
    Male
    First Name:
    Wesley
    Arkansas
    Vehicle:
    08 Super White TRD Off-Road on 37s
    3.5' RC lifted struts with RC UCA Alcan rear leaf spring upgrade with 300lbs added weight+1" lift built in. Adjustable Alcan Shackles set to add an extra inch which equals to a 2" lift in the rear. 37” Maxxis RAZR M/Ts with 1.5” spacers 8” BAMuffler Tuned by Bully Dog Tuner
    I just got some new housings that have a projector for low beam only, as well as hid lights for them. I have a relay harness, the ballasts, bulbs and all. I’m at the point where everything is hooked up except the relay harness to the factory one. Is there some sort of conversion kit from the connectors that are on the relay harness to the factory ones?
     

Products Discussed in

To Top