2001 squeaky front drivers wheel well…grease fitting there??

When I turn the steering wheel I hear a squeaky sound down near steering shaft…my pal said there is a grease fitting down there…I can’t find it …& he often talks out his ass.

Is there any grease fittings near steering shaft??

 

No there is not. It’s probably tie rods or ball joints

 

T

 

This thread says there are zerks but I can’t see diagram where they are….

 

That thread is talking about the grease zerks on the drive shaft. This is the diagram for that:





But your problem sounds like it could be the u-joints on the steering shaft possibly, if it's not what Frenchy suggested. I don't think those have grease zerks.





Part numbers and diagrams: https://parts.toyota.com/a/63340908__6731167/STEERING-COLUMN--SHAFT/671460-4501.html

https://parts.toyota.com/p/Steering-Shaft-Universal-Joint/63552040/4529035040.html

 

I agree w/ @FrenchToasty and @des2mtn on this, would be my first two things to check.

But I'd also note, your truck description only says "2001 TRD Pro" (not sure what a "Pro" is, but ...) and doesn't say whether you're 4WD or 2WD, nor what cab type (AC/DC/RC). The zerks diagram above is only valid for 4WD trucks. 2WD had no zerks on the driveline from the factory.

 

Thanks dez!!

 

Gotchya Shifty!
it’s a 2001 TRD 4x4….cab is Access Cab
Thanks!