Wheel and tire advice

Looking to purchase 20x9 +20 offset with 285/60 tires. Can’t find anyone with same set up. I have a 2-1 level. Just wondering if it will work.

 

https://www.tundras.com/threads/285-60-20-will-they-fit.84291/

https://www.tundras.com/threads/whos-running-285-60r20.96052/

https://www.tundratalk.net/threads/bfg-ko2-285-60-20-installed.730889/

https://www.youtube.com/watch?v=RX10toZ3FsY

 

That should work, I was able to fit a 35x12.5x18 on a +60mm offset wheel with a 3/1. Your tire is a 33.5” tall and 11.2” wide which is a little over an inch taller and a hair wider than stock. Be sure to get a good alignment, I really doubt you’ll rub anywhere but my guess is it would be on the front fender liner. That’s easy enough to trim/bend with a heat gun/remove if necessary.