New Member I

Good morning! Just discovered your forum. Thanks everyone for making this available and participating. Now on my second Tundra since 2000 both 1st Gens. Have an 06 Dbl Cab with 224K going strong. In process of rebuilding systems so looking forward to any advice and just offering a few of my experiences.

 

Welcome from So Cal.

 

Welcome from NY.

 

Welcome!!

 

Thanks for the welcome guys! Here's another one for y'all from Houston. I want to replace existing front Bilstein and rear stock shocks on my 2006 4.7L 2WD with 226K. I saw some threads on this for a 2018 (darthvader). I've been looking at installing 5100 Bilstein front and rear with new OEM front coils. Thoughts are I didn't want the front struts to bear the full load on (assuming) factory coils with 224k . Suspension shop can't find the coils, says on dealer back order nationwide. Bought it pre-owned in 2016 so not sure how long Bilsteins have been on it. Now drives with noticeable lean. and hits bumps hard. Don't pull, haul or load it. Im running 275/65R18 and from center rim (wheels) to fender driver front and rear 21.5", passenger front 21.75" and rear is 22.0". Also noticed the front bilsteins are higher than the 3 setting. I'm not looking to get higher lift. Your thoughts or recommendations on what this and where i might find the coils?

 

Welcome from LA (Lower Alabama)!

 

Welcome from Ohio

 

Welcome from Nevada

 

Welcome from State 48...Arizona!