Bilstein 5100 with Westcott collar question

What setting do you use to get a full 3” with the Westcott spacers and on 5100s. They are saying different on each side to account for the lean but my truck has no lean so i don’t think this will work. I don’t want to go to high but any a full 3”s

 

you should contact Westcott and see if they recommend 5100s with their setup and what setting to use. Also know, if you are approaching 3 inches of lift you will probably need new adjustable UCAs for proper alignment.

 

Jeff is supposed to call me as the one person I was in contact told me different settings on each side to account for the battery and fuel. My lean is minima so this did not make sense to me which is why I asked here.