AZ Classifieds

They were mounted on my Method MR701 18x9+25. I was able to clear these at stock ride height until my suspension arrived with a body mount chop, front bumper spacers, removed flaps and all was golden.

as for the 5th, DT damaged the bead to an unusable state ;(

 

Sounds like my stock rims will probably rub with these right? I do have the plates to do a BMC but can't find anyone in town to do it. My flaps are already removed and I can buy bumper spacers if needed but if the backspacing makes it impossible then I'll have to pass.

 

bora 1.25 inch spacers fix that.

 

...I'm a fool...


I already have spacers on the truck! I bought them specifically so I could run the larger tires first and get new rims later. Damn I miss my truck.

Ok so sounds like I'll just need to do the BMC somewhere and get some bumper shims. Let me look into this. I'm definitely interested in these though.

 

Does the bmc come with templates or instructions?

 

Yes, open a beer, make some marks, open another beer, hit the marks with a grinder, open another beer, test fit the plates, open another beer, cut some more, repeat until plates fit, open another beer, weld plates on, put out fire on fender liners, open another beer, open another beer, grind off the terrible welds, open other beer, hit it with some chassis paint, pass out.

 

Can I open a beer with the grinder? I’m in if that’s the case!

 

I believe that’s how it’s spec’d in the field manual

 

Got it all except for the welding...

 

You can always learn on the Ram.

 

Fridge and base, $650

 

I'll split it

750 chase rack
250 RW wheel and tire

 

Looks like several people have been able to run these with a lift and no BMC, having had these on your truck before and after your lift do you think it's possible i could run these now and not need the BMC right away?

 

all variable. but i think you'll be alright.

 

Price reduced to a 12-pack of craft beer or make me an offer.

Also have a dirty deeds 26” helmholtz resonator if anyone is interested.

 

Can you measure how high the horizontal bar is that is up against the cab? Wondering if this will work with my hi-lift mount…

might as well get the length of that horizontal bar as well… looks like about 48”?

 

Just got the mounts from @WBW and they don't mount to my dodge, what gives @14burrito ?!

 

Friends don’t let friends mod mopar

 

Located in Arizona 85286 - asking $900 but price is negotiable.

Used AMP Power Steps (75137-01A direct wire) in normal working order (uncut runners for crewmax), includes the 4 led pods, and extra bumpers/stops for when they need replacing.







Driver Side Operation

https://drive.google.com/file/d/1e27EfU5ozVQ_t9Ljw7zki2bV9Z8FpbpA/view?usp=sharing

Passenger Side Operation

https://drive.google.com/file/d/1W3jmPnyYDHnbK-5aRiNPEBjVIleTaZql/view?usp=sharing

Feel free to ask any questions...

-Jason

 

Someone actually picked it up yesterday. Let it go, but out of the 100 people who where "extremely" interested off FB, CL and offer-up - this was the only dude who showed lol

Looks like he will be buying the fridge and base as well.

Just have the rigid 40 left

 

Anyone have the black middle front bumper plastic they don't need?
Installed a light and broke a few of the tabs. Although it seems pretty well in place.

 

Are you looking for the whole valance or just the grille piece?

 

So did the first guy mysteriously disappear?

 

Buyer has graciously paid in full, we’re just working through logistics at the moment

 

You're just full of good news today...

 

I have the entire front bumper assembly from switching to a Shrockworks bumper:

https://www.tundras.com/threads/front-bumper-from-black-2015-trd-pro.103236/#post-2652724

I was hoping I could unload it all together, but so far no bites!

 

@DuneShoot

 

https://phoenix.craigslist.org/evl/snw/d/chandler-2019-polaris-rzr-turbo-dynamix/7450533583.html

 

That would make a sweet work vehicle.