2.5 Fox DSC Setting

I will be installing 2.5 Fox DSC all around (P/N's 880-06-947 & 883-26-006) soon. I got the rears already and just waiting for the fronts. Anyone knows where to set the adjustments close to factory setting for my baseline?

 

They are brand new units.

 

We usually suggest starting out on the softer settings and stiffen up from there as needed:
https://accutuneoffroad.com/should-i-get-dsc-adjusters-on-my-fox-shocks/

 

I run mine wide open on both high speed and low speed compression until the truck is loaded up. Once I have gear in it, I’ll stiffen the low speed compression around 3-4 clicks which helps with body roll driving on the highway. The high speed compression is only touched once off road or on horrible back roads.

keep in mind that low speed compression adjustment indirectly affects the high speed adjustment curve as well.

Pro tip to save your fingers: get yourself a pin punch set at like harbor freight or something. You can use one of the smaller punches to adjust the high speed compression by inserting it in the hole of the blue dial. It’ll get stiff as hell if you want to crank it all the way closed. You can also use a larger punch set to adjust the front coil over height (with a cheater bar) instead of using a Fox adjustment tool. It was super easy cranking them up or down with a punch instead. I just keep them in the center console.