21 limited to trd pro grille bulge issues

hey tundra brothers and sisters, I have a 21 tundra and I purchased for my limited via my mains Toyota dealer part 76180-0c030-b1 and 53101-0c070-b0 and

$21 53141-34010 DOOD Front Grille Sensor Cover for Tundra 2018 2019 2020 2021 Trd Pro Grill Radar Sensor Cover for Tundra Radiator Grille Garnish TSS Front Sensor Cover Replace 53141-34010

53141-34010 magnetic gray metallic bulge pro grille and factory garnish. I replaced bumper ends with those from sparks painted at platinum spec those were alright quality fog lamp housings have play in them not solid parking sensors were difficult to install. My biggest problem is the bulge which says platinum doesn't line up to the pro grille, the lines don't anyway. Can anyone help ,e out with this? I also need a new center console armrest tray where it says sr5 or limited my wife's nails scratched mine all up thank you

Blake

 

The lines seem fine. All 3rd gen bulges are interchangeable

 

I agree..
What is not lining up @ArdnuT trd ?

 

The bulge and grille seem a 1/4 inch off from my father in laws white pro which is dead nuts even. The bulge to the grill.

 

Are you sure you pushed the clips in all the way and tightened the screws down? It does seem a little forward but not much

 

Definitely grill needs adjustment, check if you got grille's lower guide pins seated correctly

 

I replaced the hood bulge over a year ago, and all the lines were pretty straight. Just this summer I replaced the stock Limited grill with a Platinum grill to complete the chrome removal, and with the new grill the lines don't match up quite right. All parts are OEM.

I will say that I'm not real happy with that but realize these parts are just molded plastic and don't always end up the same, part to part. Overall my truck looks much better now and I've just accepted the imperfection and don't dwell on it.