Toytec shackles with Coachbuilder bushings

The title says it all. Does this work? Anyone running this setup? I couldn't find anything about this on the site. Toytec is out of bushings. CB seems to have them in stock. In case you're wondering, I'm going with Toytec because of the 1 inch lift option. CB is .625 then goes to 1.25 inches. I'm pairing this with my stock leaf springs modifed with Icon AAL. Truck sits level now, but I would like and inch of rake.

 

You would have to know the specs for the bushings and the shackles. You may have to grind a bed bolt on the 1" setting.

 

Call Keith at @dirtydeeds. He sells Toytec shackles and suspension. He may have bushings in stock or will know if the Coachbuilder bushings will work with the TT shackles.

 

Thanks, I didn't know he sold that too. Will shoot him a message.

 

Sounds like a hassle over possibly .25”. My +2 ended up giving me almost 2”. I’d just go with the +1 CB and be done. Just my unsolicited 2cents

 

CB's are the same brand/size poly bushings as Toytec's.

 

They advertise 1.25" how did you get 2"?

 

Interesting. If that's the case, CB sells them for double the price of toytec.

 

Used an eyeball ruler.

 

Don’t know. Was surprised as well. Measured before and after. Got more than 1.9 on the 6112’s as well with one ds shim. Got 1 7/8” in back after install.

 

Energy Suspension poly bushings

 

Wild guess he replaced them along with worn out shocks all at the same time. And that much lift came from getting back to normal ride height from warn shocks and from the addition of the CBS.

 

Could be. 90k on the shocks, never beaten on though and still rode well. Never measured the difference in stock vs. the 5160’s either. So, good point.