CMC or Alignment? Whats the issue?

Hey all,

I need some advice on what to do with this, as it did not turn out as i had planned.

Here is the specs as follows.
2017 tundra 4x4 CM. JBA HD UCAs. Eibach adjustable shocks stage 1 front lift with coilovers.
285/75/18 duratrac tires. Fuel 18" +20.
Well I got everything installed today and had it aligned. I knew there was some rubbing on the front fender well, Was going to heat it up and push out of the way. Got home from my alignment and realized that i am now rubbing on my body mount.
Numbers looked good on the report sheet that I was given.
Is this from my alignment? really not sure what the next step is?
BMC/CMC? or Find someone else to do the alignment?

Thanks!

 

Post your alignment sheet but you will probably need a chop due to the offset.

 

Will do! I’ll post in the AM.

 

Do you have pics?

 

Here is the alignment sheet.

 

Drivers side.

 

BMC for sure based on the pictures. Just hack the corner off

 

That’s exactly what I’m about to do. Going to grab some cutting tools now.

 

Any more opinions from anyone?
Thanks!

 

Was it rubbing the body mount before the alignment?

 

yes it was.