1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2006 Toyota Tundra OME 2.5” Lift

Discussion in '1st Gen Tundras (2000-2006)' started by 2Tundra1FJ, Jun 5, 2021.

  1. Jun 5, 2021 at 8:35 AM
    #1
    2Tundra1FJ

    2Tundra1FJ [OP] New Member

    Joined:
    Jun 5, 2021
    Member:
    #63902
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2006 Tundra
    OME lift, diff drop, & SPC upper control arms, 2005 Tacoma wheels, 1.25” wheels spacers, LT285/70/17. No trimming on truck.
    2006 Tundra W/ OME 2.5” Lift, SPC control arms, diff drop, 2005 Tacoma 17x7.5 wheels, 1-1/4” spacers, LT285/70/17 Nitto Ridge Grapplers with no trimming of body.
    Tacoma wheels have 30mm offset and will require the spacers. 1-1/4” spacers will give you a -2mm offset and about a 1/4” of clearance of clearance from the frame with wheel at max turn. 1/2” clearance from upper control arms. I have had no rubbing issues with on road driving and the only issue is maybe some rubbing on the frame if off-roading with max wheel turn so maybe use 1-1/2” spacers if considering off-roading.

    98625A1A-B2A4-4079-A17D-32712F503D7A.jpg
     
  2. Jun 5, 2021 at 8:41 AM
    #2
    frichco228

    frichco228 Valued Member

    Joined:
    Jan 9, 2020
    Member:
    #40952
    Messages:
    5,090
    Gender:
    Male
    First Name:
    Frank
    Virginia
    Vehicle:
    2016 Crewmax 4WD, TRD Offroad
    Eibach Pro Truck Stage 2 suspension, HD RAS, 285/75-18 Nokian Outpost AT, LoPro bed cover, TRD rear sway bar, DD 10 inch exhaust, and various other goodies
    looks good. OME suspensions are built to last. Ive run them on a few vehicles. Currently run OME suspension on an 06 4runner, been on for 70k miles and still rides like new.
     
  3. Jun 5, 2021 at 8:48 AM
    #3
    2Tundra1FJ

    2Tundra1FJ [OP] New Member

    Joined:
    Jun 5, 2021
    Member:
    #63902
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2006 Tundra
    OME lift, diff drop, & SPC upper control arms, 2005 Tacoma wheels, 1.25” wheels spacers, LT285/70/17. No trimming on truck.
    I agree I also have the OME lift on my FJ with OME upper control arms. Both vehicles ride better than stock.
     

Products Discussed in

To Top