Eibach stage 2 question

Because of the availability of these I’m seriously looking into buying them this weekend but I’m curious as to how to build it to where I have 3” of lift. Obviously too setting on fronts. I’ve purchased CB shims 2 DS 1 PS and a +3 shackle. My goals to have .5-1” rake for towing my camper. Plan on running 295’s with icon bandits. Originally my plan was 6112/5160’s but I’m tired of waiting. JBA UCA too. Diff drop? And carrier bearing drop? Open to thoughts, advise, and other recommendations.

 

Do you need to get shims since they are coil overs which are adjustable to take the lean out if there is one? Maybe hold until SPC UPC are available?

 

I talked to David (@Coachbuilder1) about this last week. While you CAN adjust them for the lean, he recommended against it. It will cause a slight preload imbalance between the left and right side of the truck. I'm going to use 1 shim on the driver side and set the shocks both at 2".

 

This thread has @Elduder documenting how the install is on his truck. It's a good read that I am following very closely. I missed the sale on them, but am also considering the Stage 2 because they are readily available.

https://www.tundras.com/threads/eibach-pro-truck-coilover-stage-2-on-sale-edit-sale-is-over.86468/