35's ?

Does anyone know if 35×12.5 18s tires will fir on stock suspension on a 18 without rubbing I'm currently running a 295/70/18 with no rubbing but is if 35×12.5/18s will

 

Every truck is different, but most likely they will rub. I would expect where you are now to get some rub at least on the front flaps.

 

https://www.tundras.com/threads/largest-tire-you-can-run-stock-for-all-generations.9762/

Also try the search bar

 

Yup you will definitely rub!!! Front and back massive rub if stock Depending on wheel offset then UCA. Possibly the BMC depending on tire brand...... Get 3 lift. Bumper shims, if stock wheel get wheel spacers, remove flaps front and back. Get KO2 35’s run a bit smaller so no BMC. Do CoachBuilder alignment that’s recommended! There you go 35’s no rub

 

All that matters is the wheel offset, and a good alignment. You can fit 35's with no lift, no BMC, no bumper spacers...
https://www.youtube.com/watch?v=fK2y9NcqpYg

 

This video does not show or suggest that a stock suspension can pull this off...
from the description of this video:
"35” tires and experience un-hindered suspension travel and steering function when used with an ICON Vehicle Dynamics coilover kit."

i have this exact wheel and had minor (plastic only) rubbing with a 34x11.5 WITH a 2.4" lift.....

it will "fit", but you may not be able to go over bumps and/or turn without trimming / relocating panels.

edit: I do agree with your statement that wheel specs (offset / width) and alignment are key to proper clearance and functionality.

 

It will rub, I have 35’s with stage 6 icon.

 

Not only will it rub everywhere, it won’t fit because you’ll hit your upper arms.

edit- oh, it’s not stock wheels? -24??? Zero chance without a lift and lots of chopping.

 

Nope nope nope all wrong trust me!!!

 

Nope I dobt rub now at all also I have dont have mud flaps I disposed of those I have fender flares

 

Keyword you want 35x12.5 on 18 stock wheel I assume? Then do steps I told you and you won’t rub

 

I don't rub now but I didn't know if it was possible to go to a 35 with no rub

 

Get 3 lift. Bumper shims, if stock wheel get wheel spacers, remove flaps front and back. Get KO2 35’s run a bit smaller so no BMC. Do CoachBuilder alignment that’s recommended! There you go 35’s no rub

 

I got rid of the mud flaps months ago because I got fender flares I'm running a 295 70 18 on stock rims now with no rubbing I'm looking at getting different rims with a -24 offset I didn't know If I put 35s on if it would rub or not

 

Ughhh keep doing research that negative offset bruh!!! Lol. On stock suspension. You on the right direction though keep asking somebody will help you step by step. 35’s with wheel that negative offset out of my league. I barely have +20 offset with 35’s and massive rubbing Had to do lots work and money make it work LMAO.....

 

The cooper stt 295 70 18s

 

But thank you I appreciate the advice

 

So first what size wheels and offset you going with??

 

18 x 10 with a -24 offset

 

Those are going to stick out far.

You'll rub, even with a lot of mods.

 

Okay. Now make a new convo asking that question. “18x10 -24 with 35x12.5”. Then ask what you need to do to make that happen on your tundra. I’m sure someone here already done it and will guide you in the right direction!......

 

But keep it in this thread ...no need to start a new thread on it.

Update the original post and title

 

It is possible without major modification but every truck seems to be different. I fit 35s using the Icon +25 wheels and only rubbed lightly on the plastic behind the fog light. I just took it off and have been good for the past 7k miles. This is on a 2.5" lift.