Identifying Front-End Lighting Connectors

I have a 2011 Tundra that had front end damage and was replaced with a 2018 front end body kit. The previous owner connected the low beam headlights and the daytime/turn signal. Everything else was left disconnected.

There are 4 or 5 connectors left hanging and I'm struggling to figure out what each is for. AND I can't seem to find a reliable diagram. If anyone had a reference to a photo with the labeled connectors that would be ideal.

 

I don't have a picture but there is a collection of all the wiring diagrams in this thread https://www.tundras.com/threads/ultimate-wiring-diagrams-collection.81448/

 

Welcome from NY


Maybe the second picture is for the factory driving lights that were in the bumper. Not sure about the others unless they were for side marker lights.

 

I ended up figuring our the 2011 has a separate high beam and low beam. The previous owner installed a single light (H9) which is High and Low. Does anyone know of an adapter to consolidate the separate high and low beam connectors into a single high/low connector?