1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Greasing driveshaft

Discussion in '2.5 Gen Tundras (2014-2021)' started by Ted4311, Mar 29, 2017.

  1. Mar 29, 2017 at 11:10 AM
    #1
    Ted4311

    Ted4311 [OP] Don't Sweat The Small Stuff

    Joined:
    Mar 18, 2017
    Member:
    #6845
    Messages:
    1,450
    Gender:
    Male
    First Name:
    Tim
    SOMD
    Vehicle:
    14 Tundra MGM TRD-OFFROAD 4X4
    A LOT... NEVER ENDS
    Dug around... No Bueno.. All else fails ask for help... Do I purge it till I see new grease or do I load it with a tube?

    Someone have an area for DIY SERVICE on this thread? Trans flush, diff flush, etc...
     
  2. Mar 29, 2017 at 11:21 AM
    #2
    Thegr8punkin

    Thegr8punkin A G.D.M/Sofa King Cool/COTJ's dreamboat

    Joined:
    Jan 18, 2017
    Member:
    #6015
    Messages:
    5,365
    Gender:
    Male
    First Name:
    Connor
    Northern Colorado
    Vehicle:
    08 blue sr5 2wd
    2 +5 hp stickers
    Not sure If I understand quite what your talking about.2264c947dc3e32463f8705e76f865201_78338d64ce310af36a58c5d1d8d917ebe73736e2.jpg you take one of these and put the hose tip on the zerk fitting on the driveshaft (there are 3 if I remember correctly and pump till you see it starting to come out the side of the bearing.
     
  3. Mar 29, 2017 at 11:32 AM
    #3
    Law323

    Law323 it’s only weird if you make it weird

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    9,812
    Gender:
    Male
    First Name:
    Law
    Baton Rouge, La
    Vehicle:
    2012 4.6 L MGM DC
    Toytec BOSS suspension lift @ 3" (front) Toytec BOSS remote resi's (back) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae TRD sway bar Upcoming: LED backup lights OEM Backup camera Iron Cross Patriot step bars Trifold or roll up tonneau cover
    Any zerks on a 2wd? Haven't seen any on mine!
     
  4. Mar 29, 2017 at 11:37 AM
    #4
    Thegr8punkin

    Thegr8punkin A G.D.M/Sofa King Cool/COTJ's dreamboat

    Joined:
    Jan 18, 2017
    Member:
    #6015
    Messages:
    5,365
    Gender:
    Male
    First Name:
    Connor
    Northern Colorado
    Vehicle:
    08 blue sr5 2wd
    2 +5 hp stickers
    Only 4wd IIRC
     
    Law323[QUOTED] likes this.
  5. Mar 29, 2017 at 12:27 PM
    #5
    Law323

    Law323 it’s only weird if you make it weird

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    9,812
    Gender:
    Male
    First Name:
    Law
    Baton Rouge, La
    Vehicle:
    2012 4.6 L MGM DC
    Toytec BOSS suspension lift @ 3" (front) Toytec BOSS remote resi's (back) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae TRD sway bar Upcoming: LED backup lights OEM Backup camera Iron Cross Patriot step bars Trifold or roll up tonneau cover
    Thought so. Thanks Con!
     
    NewImprovedRon likes this.
  6. Mar 29, 2017 at 12:31 PM
    #6
    Thegr8punkin

    Thegr8punkin A G.D.M/Sofa King Cool/COTJ's dreamboat

    Joined:
    Jan 18, 2017
    Member:
    #6015
    Messages:
    5,365
    Gender:
    Male
    First Name:
    Connor
    Northern Colorado
    Vehicle:
    08 blue sr5 2wd
    2 +5 hp stickers
    Anytime buddy! :thumbup:
     
    Law323 likes this.
  7. Mar 29, 2017 at 12:37 PM
    #7
    BlueFalconActual

    BlueFalconActual Field Day Inspector Extraordinaire

    Joined:
    Jun 1, 2016
    Member:
    #3495
    Messages:
    1,625
    Gender:
    Male
    First Name:
    Kevin
    29 Palms, CA
    Vehicle:
    Tundra-less
    I could have sworn that there were 4 or 5 zerks.
     
  8. Mar 29, 2017 at 12:50 PM
    #8
    Thegr8punkin

    Thegr8punkin A G.D.M/Sofa King Cool/COTJ's dreamboat

    Joined:
    Jan 18, 2017
    Member:
    #6015
    Messages:
    5,365
    Gender:
    Male
    First Name:
    Connor
    Northern Colorado
    Vehicle:
    08 blue sr5 2wd
    2 +5 hp stickers
    I can't remember I haven't worked on a 4x4 in close to a year now.
     
  9. Mar 29, 2017 at 12:57 PM
    #9
    Thegr8punkin

    Thegr8punkin A G.D.M/Sofa King Cool/COTJ's dreamboat

    Joined:
    Jan 18, 2017
    Member:
    #6015
    Messages:
    5,365
    Gender:
    Male
    First Name:
    Connor
    Northern Colorado
    Vehicle:
    08 blue sr5 2wd
    2 +5 hp stickers
    No you're right, 3 on the rear shaft and 2 on the front (I forgot to count the ones on the front)
     
  10. Mar 29, 2017 at 1:20 PM
    #10
    JMB

    JMB Not new, just a little old.

    Joined:
    Jan 20, 2014
    Member:
    #156
    Messages:
    7,505
    Gender:
    Male
    First Name:
    John
    Chesapeake, VA
    Vehicle:
    2013 Super White Tundra DC
    5100s all around, 295-70-18 Defenders, BD reverse lights, de-badged, interior LEDs, footwell LEDs, reverse LEDs, ARE cap, front receiver hitch for cooler holder, cooler holder/rod rack, backup camera, Kenwood HU, Tyger nerf bars, Husky floor liners, folding rear seats, remote battery posts, plastidip grill chrome, Powder coat bumpers.
    This for 2nd gen I'm pretty sure.
     

    Attached Files:

  11. Mar 29, 2017 at 2:10 PM
    #11
    Ted4311

    Ted4311 [OP] Don't Sweat The Small Stuff

    Joined:
    Mar 18, 2017
    Member:
    #6845
    Messages:
    1,450
    Gender:
    Male
    First Name:
    Tim
    SOMD
    Vehicle:
    14 Tundra MGM TRD-OFFROAD 4X4
    A LOT... NEVER ENDS
    THANK YOU VERY MUCH
     
    JMB[QUOTED] likes this.
  12. Mar 29, 2017 at 2:32 PM
    #12
    CM-LENNY

    CM-LENNY No Complaints

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    1,245
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    PRO shocks, 37's Nitto G2's 4:88 diffs, few other mods
    FYI. If any of the zerks are in a tight spot, get a needle tip for the gun. Also............ALWAYS clean the zerk fitting well before greasing so you're not pumping dirt into it. Good luck with all.
     
  13. Mar 29, 2017 at 2:36 PM
    #13
    Ted4311

    Ted4311 [OP] Don't Sweat The Small Stuff

    Joined:
    Mar 18, 2017
    Member:
    #6845
    Messages:
    1,450
    Gender:
    Male
    First Name:
    Tim
    SOMD
    Vehicle:
    14 Tundra MGM TRD-OFFROAD 4X4
    A LOT... NEVER ENDS
    :thumbsup: thanks again!
     
  14. Mar 29, 2017 at 3:11 PM
    #14
    14burrito

    14burrito IG @14burrito

    Joined:
    Dec 14, 2014
    Member:
    #798
    Messages:
    3,813
    Vehicle:
    2014 SR5 CM 4x4 5.7
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
    Since the thread was started...

    Might as well ask,

    What grease gets used?
     
    Law323 likes this.
  15. Mar 29, 2017 at 4:03 PM
    #15
    crishard

    crishard Occasional Member

    Joined:
    Nov 2, 2016
    Member:
    #5065
    Messages:
    123
    First Name:
    Cris
    Vehicle:
    2014 Barcelona Red CM
    3" level in front, ICI Bumper & Skid, 12k lb winch, UCAs, Radtech 2.5s, Kenda 35s, Dual Batteries, 3500w inverter
    I haven't been able to get to the rear fitting on the front shaft. Might change it to a 45 degree
     
  16. Mar 29, 2017 at 4:07 PM
    #16
    TXRailRoadBandit73

    TXRailRoadBandit73 YOTAS,RAILROADIN',RÖKnRÖLLN',BEER,MAX/GEMMA

    Joined:
    May 30, 2016
    Member:
    #3487
    Messages:
    50,714
    Gender:
    Male
    First Name:
    Adam
    The 956, TEXAS
    None yet
    Jus did mine few weeks ago
     
  17. Mar 29, 2017 at 4:18 PM
    #17
    BlueFalconActual

    BlueFalconActual Field Day Inspector Extraordinaire

    Joined:
    Jun 1, 2016
    Member:
    #3495
    Messages:
    1,625
    Gender:
    Male
    First Name:
    Kevin
    29 Palms, CA
    Vehicle:
    Tundra-less
    How I feel when I'm about to grease the front shaft
     
  18. Mar 29, 2017 at 6:40 PM
    #18
    JMB

    JMB Not new, just a little old.

    Joined:
    Jan 20, 2014
    Member:
    #156
    Messages:
    7,505
    Gender:
    Male
    First Name:
    John
    Chesapeake, VA
    Vehicle:
    2013 Super White Tundra DC
    5100s all around, 295-70-18 Defenders, BD reverse lights, de-badged, interior LEDs, footwell LEDs, reverse LEDs, ARE cap, front receiver hitch for cooler holder, cooler holder/rod rack, backup camera, Kenwood HU, Tyger nerf bars, Husky floor liners, folding rear seats, remote battery posts, plastidip grill chrome, Powder coat bumpers.
    Your're most welcome.
     
  19. Mar 29, 2017 at 6:41 PM
    #19
    JMB

    JMB Not new, just a little old.

    Joined:
    Jan 20, 2014
    Member:
    #156
    Messages:
    7,505
    Gender:
    Male
    First Name:
    John
    Chesapeake, VA
    Vehicle:
    2013 Super White Tundra DC
    5100s all around, 295-70-18 Defenders, BD reverse lights, de-badged, interior LEDs, footwell LEDs, reverse LEDs, ARE cap, front receiver hitch for cooler holder, cooler holder/rod rack, backup camera, Kenwood HU, Tyger nerf bars, Husky floor liners, folding rear seats, remote battery posts, plastidip grill chrome, Powder coat bumpers.
    It's in the PDF in post 10.
     
    14burrito[QUOTED] likes this.
  20. Mar 31, 2017 at 11:29 AM
    #20
    akoda

    akoda New Member

    Joined:
    Feb 10, 2017
    Member:
    #6296
    Messages:
    24
    Gender:
    Male
    Old Church, Virginia
    Vehicle:
    2017 Tundra
    The 2 wheel drives should have zerks on their driveshaft in the corner of the u-joints. Also have one on the "yoke", pump the u-joints full but just give the yoke a pump or two
     

Products Discussed in

To Top