Any decent wheels closer to +50 Offset?

Just as the title says looking to change out my 20 inch stock wheels. I like the rock warriors but rather have 18 than 17. Everything seems to be around 15-25 offset which pokes too much for my taste. I don’t want to add flares and think 50 offset would be about perfect. Any suggestions? Thanks

 

Have you looked at the Evo Course Dakar wheels? I'm not sure about the offset but those seem to be the only ones I can find that doesn't poke outside the fender.

 

stock 18" TRD wheels from craigslist?

 

I thought about that. Maybe powder coating them bronze. I really like the new 2019/2020 TRD pro wheels. Especially the LC heritage ones in bronze but they’re like 2 grand for a set. Hoping the prices go down in a year or so

 

+45mm backspace

 

so, it looks like your current wheels are 20x8 +60mm offset. if you want to go with a +50mm offset wheel, those are generally a 20x9 or 18x9 wheel. this will push your tires out about half an inch. here is what it looks like with a 20x9 +50mm offset wheel with 275/55/20 tires:


here is what it looks like with a 20x9 +50mm offset wheel with 295/55/20 tires:


and here is what it looks like with a 20x9 +20mm offset wheel with 295/60/20 tires:



IMO, i don't think a +20mm offset sticks out too far. for me, a +20mm offset is not far enough out to warrant fender flares. maybe at 0 offset or lower.
but, as you mentioned, its all about personal preference

so, you can look for special edition wheels. for example, texas edition, tss edition, and (i think) trd edition. these wheels are always being sold. you can find them on craigslist, ebay, this site, and many other tundra sites.

good luck

 

I have the Monster XDs which are 35 offset. Only stick past the fender a quarter inch or so.

 

also wondering if there are any nice options with offset from 40-60

 

go to tirerack.com and do a search based on your truck. Then you can filter the results based on the offset that you want.

 

TRD Pro BBS forged

 

At a +50 offset you might as well go OEM of some kind.....

 

Can you order through Toyota?

 

You don't want to go OEM for Pro wheels. That would be about 1,700

 

The ones in my post above were $200 each and have been very solid, look great, and are easy to clean.

 

Yeah but they ugly.

 

Guess you will be spending $2000 on wheels then. Maybe you should have bought a Pro

 

Classy comment and super helpful.

 

So..... no other recommendations? I am looking at Fuel Covert Apple Candy finish at 18”x9”. They only come in +20mm offset.

Has anybody known anyone to have contacted a manufacturer and asked for custom offsets and got it fabricated!

 

They won't do it.

Just go on some rim suppliers and plug in filters. You'll find plenty of rims with other offsets.

 

Yes, check these out. 40mm offsets I believe.

 

Most of all the ones I like esthetically are in the +20-25mm offsets. Sucks.

 

We ended up with +10 as those are the rims we liked too.

In a perfect world they'd have been +35.