Westcott Designs and Wheel offset

I just installed the Westcott designs lift and my tires got smaller somehow . I want to buy 17in method mr312s (+0 offset) wrapped in 35s. How bad will I rub with the Westcott designs lift? Bmc and bumper shims required?

 

Looks great to me the way it is. You don't want to eat up all your fender well space with tire. That space gives you room to play with.

 

Your baby needs a bath, but otherwise looks perfect to me. what size tires are you running now?

 

Sure does! These are 305/65/18 BFG K02.

 

I was thinking about going with the Wescott lift on my Pro but thought my 275/70’s would look small. Those 305’s are basically the same diameter as my 275’s and it looks really good in my opinion. Did you use the block in the back or shackles? Do you have any other pics from different angles?

 

I put a one inch shackle in the back.

One inch shackle on rear.

 

Smart choice sir.

 

I have 35x12.50x18 on mine with the Coachbuilder shims...a bmc and little heat gun to the front fender well and it’s fits just fine. I had the bumper shims which made it super easy...but when I added the SSO winch bumper I had to remove them. If you had the shims you would not have to use the heat!

 

I'm surprised you needed a BMC - must have been close! Thanks for the info. Your truck is sick.

 

I feel like I messed up getting the +3 CB shackle as I don't want too much rake. Getting my Westcott installed on the 1st.. wondering if I should order a +2 instead

 

My one inch shackle actually gave me
About 1.5 inches which still gives me a slight rake.

 

CB's site says the +3 gives an actual 1.75" of height. I've seen on this site that Westcott gives an actual 2" of lift in the front.. figured it would work out. Oh well, guess we'll see! Truck looks great!

 

I purchased the same +3 CB shackles. I also have the Westcott Design for the front. Ran some calculations and I should be 1/4 taller or flat once installed. I was actually looking to keep the nose high look but I’m good with a slight rake . Please post pics if you get yours installed before I do. Planning for next month.
Thx.

 

Had mine installed Feb 1st. You're pretty much right on the money! Very slight rake

 

Perfect stance. Thanks for sharing.

 

I’m looking at the Wescott lift for my Pro. Yours looks awesome. What size tire did you go with? Do you have any other pics to share?

 

What angles are you looking for? It's been raining nonstop but I'll see what I can do.

Tires are 295/70 Cooper STT Max. Also using 1" Bora wheel spacers

 

Looks great.

 

Maybe some pics from the front/back that are slightly angled, if that makes sense?

 

Has anyone checked the gas mileage after doing the westcott lift and bigger tires?

 

Hopefully this helps. Haven't had a chance to go on any trips due to work, sorry about the parking lot pics

 

Your truck looks awesome! Thanks! Love the look. Definitely adding the Wescott to my mod list.

 

this is the westscott front with cb +2

 

Not sure if this has been asked yet but is anyone running a diff drip for the Wescott front kit? I believe Coachbuilder includes the diff drop in their kits. Thanks!

 

I am running the carrier bearing drop kit... I actually have an extra one I didn’t realize the shackles come with it already and I ordered a spare

 

Are you interested in selling your Pro wheels, if so what's your location?

 

I already sold them

 

What tires and wheels are those? Also it looks from the photo like the truck may be on a slight decline. Is it level?

 

I’m on gramlights with 295/70/19 ridge grapplers

yeah looking again it does look like a small incline. Here’s a better pic

 

Looks nice and pretty level! What made you lean toward the +2 instead of the +3?