Who has the toytec Eibach kit?

Have you guys noticed a ride difference with adding the shims vs no shims? Curious also how these will hold up with a whinch/bumper combo. I have the rc n2.0 struts and hate them

 

No difference with 2 shims on the drivers side. These are top spacers, they go between the coilover and the mount. The shims only level the vehicle (side to side), they do not change the characteristics of the coilovers or spring preload at all.

The extra weight of your winch and bumper would be a question for @Toytec Lifts

 

Tires on. Just rubbing on front lil flaps

 

Might do that myself if that's all the rubbing you're getting. Is that just the ToyTec/Eibach lift? No spacers or anything?

 

That is a really nice truck love the color

 

Yep toytec eibach with rear shackle. Nothing else

Thx

 

Thanks, looks great, notice much difference in power with the larger tires? How did they balance out, I have had a set on extreme 285/75/17s on my JK and they needed very little weight.

 

No real difference running around and the guy that put em on said he was suprised how easy they balanced for the size

 

You have pic of a side angle? Any rake?

 

Hey guys, new member here! I purchased the Toytec/Eibach 3” lift coilovers with the Toytec Boss rear shocks and I want to add 2 shims to my driver’s side to correct the lean but I was told I do not have enough threads on the 4 studs on the strut top mount. Has anybody else had that issue? TIA!

 

I have 2 CB shims on my drivers side Eibach coilover. No issues at all. Still threads exposed above the nut.

 

Thanks for the quick response! Yeah I do as well but not much. This is a picture of the nuts finger tightened. My shims are from boss4x4s.

 

Those look thicker than my Coach Builder shims.

 

Yeah I think they are but they are suppose to yield the same results as the coach builders. Oh well.

 

What rims and offset are you running?

 

Anyone have issues with the rear shackles interfering with the TRD exhaust? I'm looking at this kit on @Toytec Lifts and it says **For vehicles with the TRD Exhaust, the exhaust will need to be modified to work with shackles.

 

I have both and did not have to modify anything

 

Hey guys, I have had the Toytech / Eibach setup for about 6 months and I love it! I went with the boss rear shocks and 1.5" block. I think it has a little more rake than I wanted but still looks awesome! My wheels are Fuel Vandals 20x9 +18 with 295/60 Nitto Ridge Grapplers. I did have slight rubbing but fixed it by removing all mud flaps and cutting/molding inner fender liners.

 

Good looking truck.

 

@07tacoswb truck Look freaking BAD A$$!!! just bought the lift From Toytec going to set up the same way u have it. Have you had any problems or something else you recommend? im doing the 2" in the rear b/c i will be pulling a small RV. next thing is my wheels 33 look mean,

 

Awesome rig!! Which c-clip setting are the coil overs on and how much front lift did you get? Also are you 2x4 or 4x4?

 

Thanks!! They were left as they were out of the box. I don’t have the truck anymore to check. Truck was a 4x4.