Single Tap Turn Signal?

I've gotten so use to all the new trucks having the single tap on the turn signal stalk and it automatically blinks four or five times. I keep doing it in the tundra only to get barely a full blink.

I did the mod in my subaru, it was fairly easy to just replace the blinker module with an aftermarket one designed to give you those features.

Is something like that available for the tundra?

BTW, this is what I used for the subaru. It looks like the smart tap works on thr gen 1 tundras. Anyone know if the blinker module changed with the 2nd gen?

 

following, I'd like to do this as well...

 

Following for same

 

Mine blinks 3 times. ‍♂️

 

^ Platinum..

 

Yeah but my SR5 and Limited did it as well...all 2020.

Long story....don’t ask

 

Wow, must be a 2020 improvement..
I learned something today..

 

Yeah but were talking about a 2013. Is it possible that the connector is the same for the controller? I doubt it since the headlights are different on '14 and up.

 

This is the 2ng gen forum

 

When I got curios a few years ago, I did a search for 'One Tap Signal' and up popped "Kahtec" Mounted it on my battery, worked well but I normally hold the signal stalk to signal and very seldom sit with it flashing( sitting in a line of traffic with it on, doesn't help the light to change) I noticed it messed with the passenger side flasher, when locking/unlocking with the remote,so I removed it. Pretty easy to install though.

 

@CMB is that TRD battery hold down a OEM made part?

 

Do a search here for Coup's Battery Hold Down Bracket, he makes them in several color combos and finishes.