What have you done to your 2.5 gen Tundra today?

I got my Power Stop brake kit in, so that was my project today. Than my smoked LED tail light was dropped on my front porch, so those had to go on also. Truck stops so much better, I can't believe I waited this long have had 35s on the truck for over a year. Liking my new tail light...much better than stock. My AJT chrome delete kit showed up today also...that will be tomorrows project...

 

Hey, Holden,

Yeah, I had watched the video twice before I received the goods. The sanding was minimal, still a no go. The transmitter just appears to be either too big or high for the buttons to fully depress. The unlock button is completely “bottomed” out to the transmitter and doesn’t move. The lower two screws are not able to tighten without the panic going off. Something is off and it looks slightly warped from the side view...

Thanks for chiming in. I appreciate it.

 

Luckily this was a pretty low speed accident, and no one was hurt. To him, his life was over, so I tried to give a little bit of “been around the block” advice. There are worse things than some busted plastic bumpers...

 

That's nice of you. I hope his parents have the same attitude about it.

 

here are some pics of the AT3 4s

 

Sorry to hear /see this. Glad you are okay.

 

I have my SR5 Desert Eagle catalytic converter skid plate and RCI gas tank skid plate for 26 gal installed the passed weekend.

 

been looking at getting this for mine as well but I have a USB for my Apple CarPlay inside the console....how far over does the safe section begin?

 

I spoke with them on the phone, and they took it pretty well. I guess when he gets home, he’ll find out for sure.

Thanks, appreciate it!

 

White letters.

 

Keep an eye on those rotors. I had bad hot spots and warping with them on my 2013. I'll find the thread on them.

 

That safe is only on that side of the console. The drivers side is normal usage. Lock'er Down is a full console safe and comes with a USB extension and a USB port on the safe itself. I can snap a pic of mine if you want to see for reference. The benefit to a full safe is for the wifes purse, a camera, tablet, etc.

 

yes if you can. My issue is I installed a USB extension inside my console and the half safe has that open area on the drivers side. My USB is mount a few inches to the right of the 12v plug inside the console so just want to make sure that the half safe won’t interfere with where I have it installed.

 

over the weekend bought a 2021 TSS and pulled out my oem black all weather mats ( still has tag on it ) and put in WeatherTech mats. Needed support higher on the side for work purposes.

 

New mats

 

thanks for the pic....looking at that it may interfere with my USB location so probably have to stick with the half safe providing the open area clears my USB location

 

My unicover showed up. It was about an 8 week wait.

 

Armor week. New @RCIoffroad skid plate went on today to replace the flimsy stock thing they call protection. Heading to get sliders on this Friday thanks to @BashFab. Can’t wait!

Suspension upgrade ordered last week.

 

Sweetness! Customs sliders or a known brand? What suspension setup called you in?!

 

Thanks! @BashFab out of Columbia, SC is building me some sweet custom sliders like the ones on @Skey44 ’s truck (below).

Ordered the Bilstein 6112 (1.9 setting)/5160 combo from @BOSS4x4s. Planning on running 285/70r18s when I upgrade tires and wanted a little more height.

 

New bumper!

 

Added 2 x 60# sand tubes for the season (enough or add more?) and played in the snow some more.

Anyone have good recommendations for adding d-rings on bedfloor torx bolts to tie down the sand bags?

 

Joined (rejoined?) this forum while I wait for my 2021 to be delivered.

 

How did those Ridge Grapplers handle in the snow??

 

2WD not great. 4x4 very good

 

Which rims are those? And what are the specs on the rims and tires? Sick setup!

 

That looks fantastic, I think I'm going to get a topper myself, I really like the way that came together