Will 275 65 r20 fit 2017 with 3” leveling kit

Hey everyone! Anyone know first hand of 275 65 r20 will rub on my 2017 tundra? I’ve got a 2.5”-3” leveling kit, can’t remember which it is now. Rims are mayhem with a slight offset. Maybe 1-1.5” or so. Thanks in advance!

 

I had the same set up for a while with no issues. Once I added spidertrax spacers it rubbed on the mud flap and the front bumper. Both were easy fixes. Just use a heat gun and a basket ball to “massage” the plastic on the front bumper in and removed the front mud flaps. With that Offset you’ll likely have to do the slight mods said earlier.

 

I’ve got the “chrome” side bumpers in the front. Hoping they don’t rub! Also hoping the offset isn’t too much. Should look pretty bad ass though

 

Same here, I had to push the plastic that “seals” the bumper in, and also trim a little off the chrome with a grinder to get rid of the rub. It definitely looks better than stock but if you can go wider, do it. That was my only regret with that set up. Now I’m running a 3” lift, +18 offset, and 295/70/18.

 

Ok so it’s an 18mm offset, how much will these things be sticking out!??

 

I just got them on a 3/2 level, -1 offset and no issues

 

Do you have any pictures with the 275's? I'm running 305/55's right now with a 1 offset and was thinking of going to 275/65's but worried they'd look off with the wide stance and flares I have

 

I will get more in the daylight tomorrow. Heres what I got right after they installed.

 

Around 1”-1.5” outside the stock fenders