What have you done to your 2.5 gen Tundra today?

It wasn't as bad as I thought. The rear bench kind of sucked, but that was also the one I started with. And a steamer could be helpful, but that's really just to help get the wrinkles out faster. 2 days in 110 degree heat tightened all the seats up nicely for me.

@ElNopal just did his too and he definitely did a better job than me, so he might be able to give some tips

 

Got the grill emblem decal on. Color is spot on. I'll get a picture of the front in the sun later.

Edit to add picture in sunlight

 

is that blazing blue? if so, what color code and brand is the vinyl?

 

White letters.

 

X2

 

Yeah it's the Blazing blue equivalent that TVD does. I forget what they call it but they have a diagram that matches to Toyota colors to theirs, its spot on. Reach out to @rrentrop and he will send you a link to the decal.

 

ok gotcha. I'm wanting the color code for the vinyl to wrap items. i may check and see if they'll let me know though. thanx

 

New shoes...

 

Used it. Little flying trip to NH with hubby.

 

I have tried reaching out to @rrentrop but got no reply. Trying a second time. I want to get one of these for my truck and a sample of the Cavalry Blue material he has to see how close of a match it is and maybe wrap my door handles and mirror covers in it to cover the last of the chrome on my truck.

 

please send a link to your Yakima setup. I have a 2020 Tundra PRO crewmax.

I have a 12’ and 10’ kayak.

Thanks!

 

How are you contacting him? I've found the best method is email, tvdvinyldecals@gmail.com

 

I have been “eyeballing” this exact one for a while now. How is it? Sound? I have 35” tires...air up no problem?? Any review would be helpful...thanks in advance.

 

Videos are live on the channel, I show how I mounted all the lights, modified the side pieces, and installed the OEM parking sensors...hope it helps anyone looking at this bumper, after a little fabrication I got it looking exactly how I want it!
https://youtu.be/09QWlIrqXKI

https://youtu.be/fQh7_jGQhnQ

 

Yakima.com go to HD overhaul truck bed rack system

 

Truck is badass man

 

Thanks Dave, I appreciate that!!

 

Don’t think I’m going to even try on the back vents. There is just not enough room there to bother with.
Here are pics of my finished interior.

 

That looks nice! Did you also shoot the climate control knobs and steering wheel emblem too? I hear you about the rear vents, I did mine because I was already there to remove/replace the 12V power source with the dual USB charger. Otherwise, I, too, would have held off.

 

Yes painted them as well. The biggest pain was the shifter. Getting it apart was a pain.

 

Added a DIY bak box to my cover.

Basically two brackets that bolted into the forward most deck rail bolt location, a piece of 3/4” exterior plywood and a 2 1/2” rubber gasket to act as a flexible, yet secure lip to hold everythingon the shelf.

 

Looks great with the grey leather, and the change they made to a matte wood grain on the Limited a couple of years ago is good, its going to be awesome when you are done. Post it up!

 

Great idea, the BakBox is a POS for how much it costs

 

my buddy has one and I was mildy impressed.

I simply wanted some place to put bungees and tie downs without cramming them in the cab or under a seat

 

That about all that the BakBox is good for lol. I pulled mine out.

 

Not much but finally got rid of the dealer license plate holder front and back. No more free advertising. Also got my AJT chrome delete but only did the vents and steering wheel for now.

 

Got rid of some chrome from the interior. Vent rings are 3d printed based off a design by @jlocust and all parts were painted with bed liner in a spray can. Have some other stuff coming from AJT to remove more.

 

I have the same setup and well worth the money. Got mine through Homedepot.com it was in the “deal of the day” in May and I saved $189. Saw it a few times before in the deal section and jumped on it after I purchased my tonneau that works with it. Plus HomeDepot sell it as a kit with risers and cross bars together so it’s a simple package instead of separate from Yakima or Amazon. The side bars are sold separate but make a huge stability difference, found them on sale at rackattack.com and with free shipping during 4th of July sale. If you are not in a rush, you might be able to get the same deal by watching it at HD.