Rear blocks needed to level?

Anyone use a Ready Lift leveling kit? Does the truck sit level without adding 1" rear blocks?

 

I have it on my truck now. I added 2” block in the rear to get it level. However ride is super ruff and looking to change it out

 

Do Bilstein 5100's if you want to level it. Spacers ride rough...I changed mine after a year and a half. Rides so much better.

 

Has anyone changed to the rough country 3.5?

https://www.roughcountry.com/toyota...6720c.html?find=2018-toyota-tundra-4wd-568221

the only problem with the Bilsteins 5100 is the height. I need a bigger lift to fit my 285/55R22. I wanted to go the 35s

 

If you offroad, don't use a spacer lift. Coilovers would be the way to go.

 

I dont. My truck is a pavement princess. But the ready lift 3/2 is for some reason wearing the outside edge of my tires. And the alignment says its all within spec

 

Ahhhhh...I had the Readylift 3/2 in mine. 3 inches is borderline when it comes to alignment with the stock UCA. Some trucks are good at the 3 inch, and some are not. The machine can be in the green but the alignment is not always correct just because its green. I switched to Toytecs and SPC's. The ride is so much better.

 

If you dont mind me asking what did that run you? Do you still have the blocks in the rear?

 

I got them during Toytecs covid 19 sale.

Coilovers and rear shocks with resis were just under $1700
shackles were $200
7.5 inch Ubolts were $40 for the set
1/2 axle shims were $40 for the set
SPC UCA's were $585

The coilovers are the Aluma 2.5. You can get the 2.0 for a couple hundred bucks cheaper. You can get the regular Boss shocks for $210 for the pair instead of the resis for $450. The ubolts were needed due to removing the blocks. It's not recommended to reuse them due to the thread design. I used the shims to maintain 2 inches in the rear...I'm level instead of raked. The shackles are alot better than the blocks.

 

Yea i cant spend that kinda dough over house projects. Thats a super nice setup.
The rough country kit with the 3.5 lift looks great and comes with UCA and the rear shocks.

Someone on this forum has to be running this setup.

 

what is covid19 sale? any code?

 

I'm not sure if they still have it or not but they have a forum discount code. It is 10650

 

awesome~! it works!!!
now dilemma is ... should i get toytec vs bilstein 6112/5160.

 

Decisions decisions lol. @Toytec Lifts can answer your questions based on your goals.

 

Check out this kit. comes with front lifted C/O

 

I saw that kit. Alot of members here dont like the RC setup. Great looking kit though has everything in one for the price.