2.5in Toytec, MAX Tire Size??

Hey all, found a tundra. Have the stock 18s on it and would like to figure out what is the biggest tire size I could fit. I ordered the Toytec/Eibach 2.5" Lift Kit and JBA UCA and don't really want to run spacers. (but recommend some if I have to). I would like to try at least 34".

I know about this link https://www.tundras.com/threads/official-tundra-wheel-and-tire-setups-pics-and-info.95/ but they only list 2in or 3in not 2.5.

Any suggestions?

 

34”, Depends on tire and how much cutting you want to do with the 2.5” lift in my opinion. 33”s won’t really fit with a 2.5” lift. There are lots on here with greater knowledge than me that might help you more.

 

295 70 18 will fit you just have to trim a corner of the skid plate and remove front mud flap. Just completed this today with highest setting on billstein 5100s.

 

I have Toytec front coils with about 2 1/4“ left and tires are 275/60/20 which are right at 33” in diameter. Not much room left even with the front “air dams” removed but no rubbing with this setup.

 

I run 295 70 18 on 5100s at the middle setting, they'll fit just fine with a 2.5" lift. Any larger of a tire and the lift isn't the limiting factor, its the cab mounts. Then you're in for some cutting and welding. Not the end of the world but if you want to avoid it, stay under 295 70

 

In the same boat with a toytec lift looking for new tires but also considering wheels.

Stay with 18" or go down to 17" and more tire?

 

I have Toytec Alumas set at 3" with 285/70/18 (34's) Ridge Grapplers on a 0 offset. I have minor rubbing on the front liners at full lock.

 

What wheels are those?

 

Fuel Mavericks. Mine are D537. There is another Maverick as well in which the spokes are black. They are D538 If I recall correctly.