Cost to get Bilstein shocks

don't really want to offroad just want the height.

Also how would it effect the radar sensor.


It's a 2020 crewmax

Compensating for my small PP

Jokes aside reside in houston

 

https://www.bilsteinlifts.com/?swoof=1&pa_make=toyota&pa_model=tundra&pa_vehicle-year=2020

 

How high you lift it will determine how/if it affects the TSS systems. If you are only raising it an inch or two, you are probably not going to interfere with the radar. Issues at that lift level have happened, but are pretty rare. Once you break the 3 inch lift line you start getting into potential problems with the TSS, but some have gone higher without issue. The trucks are pretty individual, so just because one person did a mod and had an issue, or didn't, doesn't mean that it is universal.

 

Would 2.5 in the front and 2 on the back level out the truck?

 

i could be mistaken, but i think i remember reading that you should keep the rake. maybe doing a 2" in the front and 1 in the rear.

 

2 in the front and nothing in the back will level it.

 

Again, each truck is a bit different, but the TRD PRO is level with a 2-2.5 up front from the factory IIRC. I am not lifted at all, so I don't know for sure, though.

 

Damn alright

Went to the dealership to pick up a part in order. Damn saw this sexy ass lifted tundra don't how much was lift but saw bilstein on the rear not sure what was on the front

 

Non Pro Tundras with the Off Road package have bilsteins stock, so it may have just had a level up front and some taller tires. Unless it was significantly lifted.

 

Ya definitely had 35s

I'm keep the 20s stock until I need new tires. Don't see the point of getting lift and new tires. When the tire only have 2 thousand miles of them.

 

That's a good plan. It gives you plenty of time to search around and compare without any pressure.

 

The tss or the trd off road?

 

If you buy the 5100s for the front, do you need something to compress the spring on install?

 

Here is the front and back

 

TRD Off Road. The TSS is a regional dealer added appearance package. The put on blackout badges, 20 inch black wheels, black side steps, and a bedside decal. It's not a Toyota factory package, so it has nothing to do with factory suspension options. Oh, and it causes all kinds of confusion with the Toyota Safety Sense because it is also call TSS. Anyone not from the southern region where the TSS appearance package is available is easily confused into thinking that the safety system is being referenced.

 

Yep I think when I went with the pro grill it lowered the sensor, then when I lifted it might of brought it back to where it was...

 

FWIW I just got mine done with bilstein 2.5 up front 1 in the back

 

Spring compressor required to remove and install spring.

 

Doesn't someone on here have a source for relocation brackets for the TSS sensors?

 

AJT designs
Jomax customs