What have you done to your 2.5 gen Tundra today?

They are not to hard, take your time and have fun.
https://www.tundras.com/threads/diy-supercharger-install-2016-5-7-ffv.26402/

 

led tail lights

 

We're gonna need a source for those bra

 

You're gonna want to double up on the tape. The thickness and the contact area. After a while they do come off, either from the tape losing cohesion due to heat in the cab, or just from a foot dragging across it as you get out.

 

Victoria Secrets

 

https://www.ebay.com/itm/382941463826

 

Pair those up with the Off Road wheel vinyl overlays from @rrentrop at TVD Vinyl and you have a whole new look.

 

Thanks man, that’s awesome to hear!!!...I appreciate the feedback and support!!!

 

I used an allen wrench for the lower clip, worked pretty good. Do this lower first, put it in the OEM cutout like this and pull up/pry and with your other hand on the outside of the knob pull out gently, then do the upper just with a flat blade pushing down and again pulling out gently.


Yesterday put the SR black interior handles in, Ho Runner Pro wheel switches, and AJT wheel emblem on. I'm done with the interior for now! Thought it was cool the handles came with pre-applied grease for the locks/handle cables.

 

Long story short: great deal on a truck that’s in great condition and I just didn’t like the Exterior color. So got a great deal on factory paint job. It all worked out. The interior is tan, btw.

 

Just got the rigid dually fog lights in today, getting the factory bezels in a few days to swap ‘em in flush.

 

Smoked out badges.

 

UPDATE:

ok guyssss, so I was just wrapping up the magnuson install, I lifted the fuel rail and a fckn bolt fell in the injector hole. I took off the valve cover and still couldn’t see it. Any answers anyone? I don’t wanna start it up until I get it out. Used magnetic and no luck.

 

Di

Diggin' your chickens, bro.
What breed are these? Have 7 hens myself.
Call the coop my Backyard Fish Bowl... they're great pets.

 

Took a WFH job in Sept 2019 and now with the ultra-lockdown due to our psycho governor...am at only 30,700 on my 2015...

 

I just did the exact same thing. Same RAM Mount too. Love it

 

I worked from home prior to this nonsense and had a 2017 Challenger with 20k on it.

 

We have about 20 chickens including 3 roosters, but these two are a black australorp hen and a polish crested rooster. Chickens are good animals to have around, they really keep the bug population to a minimum

 

DON'T START IT.

If magnets didn't work, buy or rent a camera snake camera. It's the best way to search.

 

Yep, time to borescope the engine! Hope it’s in an easy spot...

 

If it fell in the injector hole, look inside the lower intake manifold, if you are unlucky it may have moved past an intake valve into the cylinder but I doubt it. A boroscope will help you see if it has or has not.

 

Looks beautiful

 

Walmart has a cheep borescope that might help. https://www.walmart.com/ip/2-0MP-Wa...6360304?wmlspartner=wlpa&selectedSellerId=503
Can you take a picture of the suspect hole it fell into?

 

If it was forsure a injector hole it most likely is resting against an intake valve, unfortunately if magnets dont work you will have to remove the supercharger to retrieve. Good luck

 

I have Firestone Ride Rites, took a load to the scrap metal yard this morning, put a little air in and the truck was level and ride great. I like ‘em.

 

Got the 2nd gen Airlift WirelessOne

$538 25980EZ Air Lift WirelessOne 2nd Generation + EZ Mount On-Board Air Compressor with Mobile App - 25980EZ

25980EZ mounted to go with the Firestone bags, this thing is awesome...super convenient...still have to pair it to my phone so I can use that or the remote...install videos of both bags and wireless system will be up on my channel in the next couple days, I mounted it a little differently than I’ve ever seen before, and couldn’t be happier...it’s completely out of the elements and protected, and you can’t hear it at all when inside truck...and zero holes drilled into truck anywhere, love it!...so nice to just hit a button and adjust the bags on the fly!
www.youtube.com/NitroZ18Fishing

 

Thank you my friend! That Voodoo Blue is something special too.

 

Super easy one today, put on my in-channel AVS rain guards.

 

Got to put on my RCI Bed Rack and RTT.
RCI @RCIoffroad went above and beyond for me, helped me with shipping times as well as sending me replacement brackets because I broke the first one I mounted. Just overtightened it and it popped the threads out. My fault there.

Also put on @ragofabrication Bed Stiffeners. Pretty easy install with some moderate drilling required.

Very happy with both products and the end result of the bed!

I threw up my RTT but it was dark so I will open it up and take pictures later!

 

Just a heads up yakima make s 4 bike rack that stores vertical it isn't cheap but anything yakima never is. you can get four bikes in the space of those two you have in the back.