Can We Talk About Length?

Lug (stud) length that is...

Love my 20" Limited wheels, one of the reasons I purchased limited vs. platinum. CEMENT also had a lot to do w/ my decision.

Not interested in changing wheels, however, I am looking for a bit more aggressive stance (increased offset) w/ my factory wheels and 295/60/20 Toyo AT2's. (could use a little more clearance between sidewall and UCA as well - very close)

Anyone know the lug length on a '19 Tundra?

I am looking to add some hubcentric (BORA of course) wheel spacers, and DO NOT want to trim the lug (stud).

I've done the search... Seeing some of you running the 1 inchers and others running the 1.25's. No one mentions having to trim the studs.

Can I install the BORA 1" wheel spacer WITHOUT trimming the studs, or will I need to go 1.25"?

Thanks fellas.

 

I prefer girth

 

Here's the lug... Exactly 2"


I don't know about needing to trim them or not.

 

I have 1.25” bora spacers. No trimming required. Not sure about the 1 inch ones. Contact david at ekstrom designs. He sells them.

 

You should be good as long as you stick with oem wheels. They have a cut out on the back that will recess the stud.

 

Similar to these RW wheels

 

Thanks for all replies!

 

3 1/2 inches...... wait, what are we talking about?

 

I run 1.25" Boras with stock 18" pro wheels no trimming anything less will require trimming IIRC.

 

OP did you ever order and install your 1 inch spacers?

 

went w/ the 1.25" BORA spacers. perfect stance w/ NO trimming necessary. unfortunately, i do not have any current pics. however, they look great, and i would not go any less than 1.25" or any more than that. they look great w/ a 3/1 lift.

i'll add that if your running 34" tires, you WILL need to trim the front plastics, OR, order the 1/2 front bumper spacers. i'm running the front bumper spacers, as i did not want to re-mold / trim plastics.

i did have very slight rub on the front mud flaps (running 34's). removed ALL mudflaps, and ZERO rubbing at full lock in either direction.