What have you done to your 2.5 gen Tundra today?

Put painted tow hooks back on and installed TRD rear sway bar. Thanks again @Roman.

 

Very nice. I ordered a skid as well but from Victory. Kinda wish I went with RCI over Victory. Guess RCI is still open for business?

 

Dechrome complete

 

.

 

Finally replaced

 

indeed. ADD stealth fighter

 

I really like the look of your truck. Nicely modified man.

 

thank you. Not done yet!

 

I did mine this week with climate control knobs, climate trim rings, and the shift gate cover..
Swapped my silver TRD knob for a black one..
No more dash chrome.

 

Cleaned up my battery cables yesterday.
My amp line was too long and that yellow o-ring I used to ground my amp steps years ago looked out of place.
Shortened the amp line, made a better tight clean connection going into the fuse holder.
Had to extend that step ground wire, put a better o-ring on it and connected it to a factory ground.
Replaced the battery to body ground with 0ga a few months ago..
Oddest thing?
No one will ever see it but me and whoever changes my oil at the dealership.

Before..






After..

 

Vinyl wrapped some interior trim, added a bunch of ajt stuff to delete chrome and plasti dipped my wheels

 

Installed mine yesterday. They look nice. I went with white but blue may also blend with the dash lighting.

 

This happened...

 

Had a very long day today. I installed my summer wheels last week, but today I installed my new trd pro grill that was colour matched to 202 black along with a colour matched bulge and my home made garnish. I also installed 2020 trd pro headlights with the iHacker harness, and foglights with led bulbs along with a cheap harness (that I like better than stock because I can have the fog lights on whenever I want and have a button to turn them on). Then I washed my wife’s car my truck my motorcycle and my atv after going for a long ride with the wife through some washed out roads. It was a good day of social distancing! I don’t know why they are all posting sideways...I tried to fix it but they stayed crooked.

 

Once the glue dries I’ll remove the tie wraps from the garnish. I didn’t want to cut the grill up in case my diy garnish didn’t work out and I had to get a real one, so I painted the garnish area of the grill with flat black paint so the gloss of my garnish makes it sort of look like it’s just part of the grill

 

I got rear ended recently, and the only damage was to the tail light...so I decided to upgrade.
I usually get smoked tails for darker vehicles...but since we move a lot and I never know what the laws will be where we move, I went with clear. Unfortunately, clear has an almost white outline when mounted. Instead of returning them, since I really like them, I wrapped over the white part with matte black vinyl. I like how they turned out.

 

Got it filthy dirty. And ordered everything that AJT Designs makes for the 14 - 17 Tundra. Even pre ordered the radio knobs. Gotta support small businesses right now!!!!

 

Stole @Alkare idea (something I had also been pondering) and modded a stick on rear visor to an in channel one...

 

Sealant applied this morning. Waxed the trailer while it cured. Then got a layer of Collinite 845 on.

Waiting another ten minutes then back to it...wax on, wax off

 

We never are done upgrading

 

Ok so did it come with the rigid industries light bar? How do you like it? I seriously looks outstanding!!! What about the winch did you install one yet? Could you please post a couple more photos please? I'm seriously thinking about adding one to my truck

 

How did you do the vinyl wrap? Is there a institutional video? You really did a nice job it looks great!

 

nice ! how hard was it and how long did it take ?

 

I’ll be honest, it’s really difficult your first time. To do the middle you have to take EVERYTHING apart to get to it. Just patience and a blow dryer does the trick. The doors are almost harder because you cant remove the silver trim from the door panel. A real sharp razor blade and a steady hand to cut it along the edges.

 

Those headlights are a looking a little chrome-y. Time for some black pro leds!

 

Pollen and dust removal is starting to become an almost daily thing. But I have a lot of extra time on my hands now. Turned into a quick detail today.

 

Link?

 

added Carbon Fiber door sill protectors and Husky-made Gator-branded floor mats.

 

You’ll notice in the sales photo that you can’t see the white outline.


AnzoUSA 311233 Tail Light

$336 AnzoUSA 311233 Tail Light

https://www.amazon.com/dp/B00W1RJ6FU/ref=cm_sw_r_cp_api_i_5MsIEbV9KCA6A

 

Installed the BAMuffler 8 SS. Sounds really good. The quality of product is top notch. Thanks Keith and crew.