What have you done to your 2.5 gen Tundra today?

What suggestions would you give for led switches?

 

I had a hard time letting go of the Cement Pro because I loved that color. But, I've got to say, this is my absolute favorite color now. Like the Cement, the green seems to change shades throughout the day. It seems like every time I park it, there's some dude that stops whatever it is he's doing and stares.

 

Becky got new pair of sexy glasses (like those hot librarian ones) today. Installed the 2019 TRD Pro headlights with iHacker harness, VLED's turn signal and VLED's resistor. I did the DRL bright all the time version, and left the amber DRL. I didn't realize it before but the amber turns off when the headlights are on, I guess I never noticed that on my stock headlights.

They have a little stripe on the edges, matches the MGM pretty good.

Headlights:
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-headlamp-assy-rh-811100c211
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-headlamp-assy-lh-811500c211
Blinker bulbs: https://www.vleds.com/7443-50-hv-amber.html
Resistors: https://www.vleds.com/vlr-6-duotap.html

Bulb comparison.

Where I put the resistors.






Went for a little test drive after it got dark tonight, so much brighter than my stock lights! Height adjustment looked good, I tried moving one with the screwdriver because I thought it was a little higher than the other side, but I couldn't see the light moving at all, unless you have to turn it a lot to make a difference. They seem like they have a lot more vertical light output too, I might need to use the level adjustment to put them down a little to not blind people.

 

Looks awesome! Nice that it matches the MGM. They do take a lot to move. I just did it when I installed mine this past week. I went with JDM Astar switchbacks in my DRLs.

 

Just got my spray on bed liner , side steps and tri fold tonneau cover all installed this weekend everything turned out really good ! Didn’t take pics it’s been raining on and off all weekend !

 

What roof rack is that?

 

Not really what I did to but what I did with. Took my son up Sabbleback mountain in SoCal. Great weather until we got to the top when the clouds moved in and it got to 44°. Super fun and great time hanging with just my son all day. Reminded me of the days I would come up here with my dad in our Ford Ecoline 2wd van and watch guys hanglide. That was back in the 70's.

 

Same as above just ocotillo for me

 

Peeled them off, sanded, primed them and then sprayed with regular Spraycan from Autozone (7 coats) then replaced double sided tape and put them back!

 

Great photos!

 

Great looking truck! I used to live in El Centro and remember going to Ocotillo back in the day.

 

Truck looks Rad! I think I saw pics on Xtremes instagram - did they do the install? I'm in Chesapeake.

 

Finally done with the chrome delete in this spot, now on to the dash and doors..

 

Installed E3 spark plugs. I love toyotas wire harness routing!

 

I'm definitely glad we built the house this way! Thanks too man!

Love it!!! That blue debadged like that looks amazing! Especially with the color matched handles!

 

What's your plan for the doors?

 

I plan on either color matching all the silver trim pieces to MGM or just painting them black.

 

I want to do something to mine as well, it sucks that you have to take the whole door panel off, so the silver pieces can be taken off. You would think they would just snap into place, like everything else in the interior.

 

The rest of my goodies came in, so I can finish the shifter area

 

Hey guys, new to the forum. I'm a Tacoma guy but my dad just picked up a 2019 Sr5 4x4. We just installed a 3" lift on it and some 35's. Love these trucks. I have some of the stock parts to tell. I am a member on Tacomaworld and have sold a lot on there. I thought I would ask on here what stock coils and shocks go for. They have like 25 miles on them. lol.

 

Scan through the BST in here and take a look for going prices. I don't believe their in as much of a demand as what the 3rd gen tacoma coils/shocks were going for with the 2nd gen guys.

Don't forget the BST rules though!

 

yes sir! Good to see other people in area up here. Great shop and awesome people.

 

Im somewhat familiar with the rules as they are the same over on Tacomaworld I am pretty sure. Do 3rd gen shocks and coils fit second gen trucks?

 

Yep. Some of the same Moderators too. Yes the 3rd Gen Taco shocks and coils fit on the 2nd gen Tacos. You actually will gain about a 1 inch lift on the front. A lot of 2nd gen guys buy the knockoff's for a quick easy slight lift. Search through the threads there and you'll find some about it.

 

Added some Rigid OEM fogs and amber floods

 

I'm very happy with the outcome. I did steal the American Flag idea from another member, but who hasn't stole and idea or 2 from here.

 

Got back from a trip with some friends in SC.

 

Love be the bumper. Did you get the 4 inch extension or whatever it is when you ordered?

 

Thanks Ron.