What have you done to your 2.5 gen Tundra today?

That took a lot of patience. 192 bolts is a lot. 96 out, 96 in. Hope you used power tools. The wheels look great though. The black is how they should come in the first place.

 

I did the same, thank god for dewalt drills... haven't lost a bolt yet either which is nice!

 

I'l be doing the same, searching for anodized black hex or torx to replace the chrome. Or even rubber plugs just tip complete the dechroming.

 

I had done this a year or so ago. I went with one bulb that was too bright so I went and selected the lowest lumen 8mm bolt light I could get and it's good now. This one is amber so doesnt look as good as white or blue but it doesn't cause any eye strain issues for me

 

Ocotillo wells? Dirt looks perfect after the rain we got this week.

 

Installing my prinsu now....
Started last night and drill crapped out on me, had to just tape the holes up and wait til today

 

I wouldn't have thought painting that weld would make that big of a difference. I just might do that. Very nice looking truck.

 

Yep. Second registration.

 

I make a lot of new modifications those are a few ones.

Complete Suspension OLD MAN EMU Kit 3,5 inches
BF Goodrich Tires All-Terrain T/A KO2 325/60 R20
RIGID Bumper lights
ROUGH COUNTRY 30 inches bar
Ventilated brake system with ceramic pads
TRD Air Intake
TRD Skid Plate
TRD Headlights
ARB Breather Kit
ARB Double battery kit with 2 Optima blue 1.100 AMP

$366 Firestone W217602445 Ride-Rite Kit for Toyota Tundra

Firestone W217602445 Ride-Rite Kit (pending to install)
ARB Freezer Element
ARB Portable Fridge
ARB Complete kit for the Element Freezer
ARB On-Board Twin High Performance Air Compressor
Kenwood Excelon base, amplifier and components
12.1 inch Android (Tesla Style) (pending to install)
Weather Waterproof Floor Mats
Maxracing Short Aluminum Antenna
Toyota Tundra SDHQ Built Hidden Winch Mount (pending to install)
VR EVO 12 Winch (pending to install)

$214 WARN 90287 Winch Component Accessory: Wireless Remote Control System for Truck and SUV Winches with 5 Wire Electrical System

WARN 90287 Wireless Remote for Truck (pending to install)
TRD sway bar
Xprite Led Rock Light for Bed Truck

 

3 primer coats, 3 color coats, at 3 clear now but I will be wet sanding with 2000 and then doing a few more clear. Coming out good.

 

How do you like that OME set up? Did you go with the heavy load or light load? Your trucks stance is mean looking. I’ve considered it as a replacement for my 3/1 spacer kit that’s kinda rough but really like the height and don’t want to lose any more height. Nice Rig btw!

 

Just installed CB bumper shims. Removed 7 of the 8 bolts, removed plastic trim and tow hooks. Had just enough room to insert one plate at a time. Was doing this install by myself and wasn’t that bad. Keeping one bolt on one side then switching to the other made it really convenient. Affordable alternative at the time. Waiting for tires and wheels to arrive soon. Chrome delete is way overdue. Nice Tundras all over this forum!

 

New tires! 285/75R17 Cooper Discoverer AT3 XLT's. Been 3 days since they were put on and I love 'em.

 

Added some red accents!

 

Today, replaced and installed the new Tundra and SR5 matte black emblems to complete the “Goodbye Chrome “ On my 17 CM. 46 K , Quicksand Grill and hood bulge, vision granite alloy wheels, Falkin Wildpeak A/T 3, Ignite 4” step bars, Ecoological TPO bumper covers,( front& back) and matte black Thule transporter racks. Cover king mesh seat covers and a full bed liner insert. Always room for upgrades but for now a good looking surf rig. A year and half transformation.

 

Installed back-up LEDs.

 

Washed after some SoCal rain and ran out of day light.....no problem just squeezed into the garage to finish

 

Looks great! Are you running spacers with those wheels? Any rub happening?

 

Cut down my tool box and made new mounts to bolt to the rail system so it all fits under my bakflip cover.

 

Tried it again last night. This worked and I got them on. Still not as flush as the ones that were on there, but acceptable. Thanks!

 

It's not as tight fitting as the black one IMO. I have a spare, I'll look how snug it is in comparison. Color keyed caps might just making us think it's not on right since of the color transitioning from black.

 

Thanks! I leveled the truck with Bilstein 5100's, no spacers. I haven't found any rubbing.

 

Went with the tyger star steps for the 19 sr5 SX.

 

I took apart the grill, primed, painted, and clear. Clearcoat have yellow tint. I guess I have to start over again in a few weeks when I get my bumper shellz.

 

Looks good from the pics you posted. What clear did you use?

 

Rustoleum that I found lying around the garage. I did not realized that these dupli-color I picked up have no gloss in it.

 

Got the steps installed last night and found some time today for a wash. Took her for a hour long drive with the music cranked to dry everything off, then cleaned the windows and put protectant on the tires and plastic trim. She’s ready for the rain tomorrow.


One of these days I’ll get some time in the mountains and I’ll have some photos from other than the driveway...

 

Decided to make my own bracket for the battery. Total cost of parts was only 13$ and an hour of time.