1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Can you get 3.3 caster??

Discussion in 'General Tundra Discussion' started by DM 2018 Tundra, Oct 22, 2019.

  1. Oct 22, 2019 at 2:50 PM
    #1
    DM 2018 Tundra

    DM 2018 Tundra [OP] New Member

    Joined:
    Nov 1, 2018
    Member:
    #21227
    Messages:
    719
    Gender:
    Male
    South Carolina
    Vehicle:
    2018 Limted Tundra
    6inch RC with upgrade struts. 295/65/20 Nitto Ridge grappers 20x9 fuel vapor with 0 off set
    Good evening folks. Back in town and decided to pull the trigger on some more mods. Went to the aliment shop and working everything out for UCAS and tie rod ends. Unknown to me the shop has been talking to RC about the bump steer and passenger front tire dipping/cupping. RC said I need 3.3-3.4 caster. The shop put it back on the rack and said the passenger side lower has already been shimmed and maxed out. An old gentleman came by and said you never get. Lol. Does any has there spec. Here is mine below. RC said there was more room but shop says it will drive bad. Thanks F2E3FB78-DDC8-480C-AFC9-0E4CB6317F4A.jpg
     

Products Discussed in

To Top